1 Set Prusa i3 MK3 Multi Materials 2.0 MMU2.0 3D Printer Motors Kit NEMA 17 Lead Screw Rod Motor Kit With Cable 1 Set Prusa i3 MK3 Multi Materials 2.0 MMU2.0 3D Printer Motors Kit NEMA 17 Lead Screw Rod Motor Kit With Cable

$66.90
$54.86
1 Set Prusa i3 MK3 Multi Materials 2.0 MMU2.0 3D Printer Motors Kit NEMA 17 Lead Screw Rod Motor Kit With Cable Function:   It’s just like printing on the...
1 Set Prusa i3 MK3 Multi Materials 2.0 MMU2.0 3D Printer Motors Kit NEMA 17 Lead Screw Rod Motor Kit With Cable Function:   It’s just like printing on the...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 594 In Stock

1 Set Prusa i3 MK3 Multi Materials 2.0 MMU2.0 3D Printer Motors Kit NEMA 17 Lead Screw Rod Motor Kit With Cable

01

Function:

 
It’s just like printing on the standard MK3 – slice the model, export the G-Code, put it on an SD card and you can start printing right away without any hassle. Plus, our MMU 2.0 is the only device that supports up to 5 materials loaded at the same time.
 
the new MMU 2.0 has a direct-drive feed and a motorized selector head with an integrated filament sensor that takes care of loading and unloading filaments. It’s pretty cool to watch it go. We know that the original multi-material addon was prone to jamming (also because of the Bowden system), so we decided to fix that. The selector has a built-in blade that will cut off the filament tip if it gets stuck during unloading. As a result, the new unit is less sensitive to the filament quality, and jams should be a thing of the past now!
 
it placed three buttons at the top of the MMU 2.0 body – two for moving the selector head and one for loading/unloading filaments. The buttons also have some advanced functions. For example, you can use them to calibrate the length of the PTFE tube.
 
MMU 2.0 supports printing in Single Mode, which works the same way as printing on a standard MK3 machine. You can have five of your favorite filaments loaded and just choose the best one for the current job. In addition, we’re working on a firmware update that will allow printing older MK3 G-codes in MMU2 Single Mode.
 
The MMU2 installation is a good opportunity to upgrade your extruder to a better one. It features an improved cooling system, enables easier printing of flexible materials and it has some little tweaks like reworked cable management.
 
Package listing:
 
1PC 39mm stepper motor
 
1PC 110mm-length rod motor
 
1PC 120MM motor
           02
IMG_3471 IMG_3472 IMG_3473 IMG_3474 IMG_3475 IMG_3476

 

 

1 Set Prusa i3 MK3 Multi Materials 2.0 MMU2.0 3D Printer Motors Kit NEMA 17 Lead Screw Rod Motor Kit With Cable

01

Function:

 
It’s just like printing on the standard MK3 – slice the model, export the G-Code, put it on an SD card and you can start printing right away without any hassle. Plus, our MMU 2.0 is the only device that supports up to 5 materials loaded at the same time.
 
the new MMU 2.0 has a direct-drive feed and a motorized selector head with an integrated filament sensor that takes care of loading and unloading filaments. It’s pretty cool to watch it go. We know that the original multi-material addon was prone to jamming (also because of the Bowden system), so we decided to fix that. The selector has a built-in blade that will cut off the filament tip if it gets stuck during unloading. As a result, the new unit is less sensitive to the filament quality, and jams should be a thing of the past now!
 
it placed three buttons at the top of the MMU 2.0 body – two for moving the selector head and one for loading/unloading filaments. The buttons also have some advanced functions. For example, you can use them to calibrate the length of the PTFE tube.
 
MMU 2.0 supports printing in Single Mode, which works the same way as printing on a standard MK3 machine. You can have five of your favorite filaments loaded and just choose the best one for the current job. In addition, we’re working on a firmware update that will allow printing older MK3 G-codes in MMU2 Single Mode.
 
The MMU2 installation is a good opportunity to upgrade your extruder to a better one. It features an improved cooling system, enables easier printing of flexible materials and it has some little tweaks like reworked cable management.
 
Package listing:
 
1PC 39mm stepper motor
 
1PC 110mm-length rod motor
 
1PC 120MM motor
           02
IMG_3471 IMG_3472 IMG_3473 IMG_3474 IMG_3475 IMG_3476

 

 

size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.