English
French
You have no items in your shopping cart.
$59.51
1PC Silicone Heater Pad 400x400mm 120V 1000W For CR-10 S4 3D Printer Bed With Adhesive Backing Size: 400mm x 400mm ( approx. 15.7" x 15.7") Power: 1000W Accessories: 1m...
1PC Silicone Heater Pad 400x400mm 120V 1000W For CR-10 S4 3D Printer Bed With Adhesive Backing Size: 400mm x 400mm ( approx. 15.7" x 15.7") Power: 1000W Accessories: 1m...
Availability:
598 In Stock
1PC Silicone Heater Pad 400x400mm 120V 1000W For CR-10 S4 3D Printer Bed With Adhesive Backing
Size: 400mm x 400mm ( approx. 15.7" x 15.7")
Power: 1000W
Accessories:
1m power cable(white)
Surface mount NTC 100K thermistor + 1m extension wire(red)
3M adhesive backing
4 pre-made screw holes as per drawing
Important Notes:
Please heat only when after it's mounted onto the build plate (Aluminum plate recommended).
Package included:
1* silicone heater 
|
supply voltage: |
0-400V,Please contact us for other voltages. |
|
Insulation Material: |
Silicone Rubber Coated Fiberglass |
|
Max.Operating Temperature: |
260 Deg C or 500 Deg F |
|
Max.Power Density: |
5w/sq.cm depending on application |
|
Heating Elements |
Wire Wound or Etched Foil.Please contact |
|
Resistance Tolerance: |
about +/- 5% |
|
Thickness: |
1.5mm |
|
Flammability: |
Flame retardant |
|
Thermal Protection: |
On board thermal fuse,thermostat,thermistor and PT100 are available as part of your thermal management solution. |
|
Power Leads: |
High temperature PTFE or Silicone insulation leads |
1PC Silicone Heater Pad 400x400mm 120V 1000W For CR-10 S4 3D Printer Bed With Adhesive Backing
Size: 400mm x 400mm ( approx. 15.7" x 15.7")
Power: 1000W
Accessories:
1m power cable(white)
Surface mount NTC 100K thermistor + 1m extension wire(red)
3M adhesive backing
4 pre-made screw holes as per drawing
Important Notes:
Please heat only when after it's mounted onto the build plate (Aluminum plate recommended).
Package included:
1* silicone heater
|
supply voltage: |
0-400V,Please contact us for other voltages. |
|
Insulation Material: |
Silicone Rubber Coated Fiberglass |
|
Max.Operating Temperature: |
260 Deg C or 500 Deg F |
|
Max.Power Density: |
5w/sq.cm depending on application |
|
Heating Elements |
Wire Wound or Etched Foil.Please contact |
|
Resistance Tolerance: |
about +/- 5% |
|
Thickness: |
1.5mm |
|
Flammability: |
Flame retardant |
|
Thermal Protection: |
On board thermal fuse,thermostat,thermistor and PT100 are available as part of your thermal management solution. |
|
Power Leads: |
High temperature PTFE or Silicone insulation leads |
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.
