$15.60
$11.23
3D Printer Hotbed Build Plate 3D Printer Polypropylene Build Plate 220x220x3mm FOR Anet A8 A6 Prusa I3 Printer VS Glass Plate Description     The  FYSETC Polypropylene Build Plate is...
3D Printer Hotbed Build Plate 3D Printer Polypropylene Build Plate 220x220x3mm FOR Anet A8 A6 Prusa I3 Printer VS Glass Plate Description     The  FYSETC Polypropylene Build Plate is...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 197 In Stock
3D Printer Hotbed Build Plate 3D Printer Polypropylene Build Plate 220x220x3mm FOR Anet A8 A6 Prusa I3 Printer VS Glass Plate
01
Description  
 
The  FYSETC Polypropylene Build Plate is a 3d printer build plate to be used instead of glass, mirror beds or adhesive surfaces.  
Thickmess:3mm+/-0.3mm.
Hardness:118-120.
Heating resistance :160°C
Flatness: 0.75mm
Base material :Non-alkali glass cloth,epoxy resin.
No more wasting hours of your time using tape and low-quality build surfaces.
Made from a durable, rigid material with a long service life.
Consistent and reliable prints.
Strong adhesion properties firmly hold your parts to the bed while printing.
When your print is complete and the build plate has cooled, parts can be removed by hand.
Works extremely well with ABS, PLA, PETG, wood and many other types of filament.
Can be attached directly to your glass bed using clips or tape.
 
 
How to use your new polypropylene build plate ? 
Note: the polypropylene build plate has different properties than a glass or mirror plate. 
1) Remove old build plate 
2) Make sure bed is level and flat in all directions 
3) Install your new polypropylene build plate and make sure it is securely fastened to the print bed. 
4) If you have a heated bed, please heat bed to normal operating temperature for 5 minutes. 
5) When bed is heated, double check for flatness. 
6) Perform your leveling routine. Bed may require adjustments to level due to differences in plate thickness
7) Note that some adjustment to previous bed temperature settings may be required. Make test prints to verify proper adhesion.
8) Large build plate format (510mmX510mm) may require additional adjustments to the temperature.
9) Enjoy stress free printing with your new build plate!
 
Note: If you see reduction in adhesion, please clean with Isopropyl alcohol and a clean cloth.
Suggested Bed temperatures may vary depending on filament material.
Temperature settings for different filaments: 
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended ) 
4. PC:100-130℃ ( 120℃ is recommended ) 
5. Nylon:90-120℃ ( 110℃ is recommended ) 
6. PP:100-130℃ ( 120℃ is recommended ) 
7. PETG: 50-70℃
 
02
IMG_20190124220 IMG_2019024220 IMG_5868 IMG_5869 IMG_4770 IMG_4773 IMG_4774 IMG_20190124_153557 IMG_20190124_153617 IMG_20190124_153822
 

 

 

3D Printer Hotbed Build Plate 3D Printer Polypropylene Build Plate 220x220x3mm FOR Anet A8 A6 Prusa I3 Printer VS Glass Plate
01
Description  
 
The  FYSETC Polypropylene Build Plate is a 3d printer build plate to be used instead of glass, mirror beds or adhesive surfaces.  
Thickmess:3mm+/-0.3mm.
Hardness:118-120.
Heating resistance :160°C
Flatness: 0.75mm
Base material :Non-alkali glass cloth,epoxy resin.
No more wasting hours of your time using tape and low-quality build surfaces.
Made from a durable, rigid material with a long service life.
Consistent and reliable prints.
Strong adhesion properties firmly hold your parts to the bed while printing.
When your print is complete and the build plate has cooled, parts can be removed by hand.
Works extremely well with ABS, PLA, PETG, wood and many other types of filament.
Can be attached directly to your glass bed using clips or tape.
 
 
How to use your new polypropylene build plate ? 
Note: the polypropylene build plate has different properties than a glass or mirror plate. 
1) Remove old build plate 
2) Make sure bed is level and flat in all directions 
3) Install your new polypropylene build plate and make sure it is securely fastened to the print bed. 
4) If you have a heated bed, please heat bed to normal operating temperature for 5 minutes. 
5) When bed is heated, double check for flatness. 
6) Perform your leveling routine. Bed may require adjustments to level due to differences in plate thickness
7) Note that some adjustment to previous bed temperature settings may be required. Make test prints to verify proper adhesion.
8) Large build plate format (510mmX510mm) may require additional adjustments to the temperature.
9) Enjoy stress free printing with your new build plate!
 
Note: If you see reduction in adhesion, please clean with Isopropyl alcohol and a clean cloth.
Suggested Bed temperatures may vary depending on filament material.
Temperature settings for different filaments: 
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended ) 
4. PC:100-130℃ ( 120℃ is recommended ) 
5. Nylon:90-120℃ ( 110℃ is recommended ) 
6. PP:100-130℃ ( 120℃ is recommended ) 
7. PETG: 50-70℃
 
02
IMG_20190124220 IMG_2019024220 IMG_5868 IMG_5869 IMG_4770 IMG_4773 IMG_4774 IMG_20190124_153557 IMG_20190124_153617 IMG_20190124_153822
 

 

 

size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.