Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit

$389.00
$357.88
Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit What you will get with this upgrade? NEW...
Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit What you will get with this upgrade? NEW...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 96 In Stock

Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit

01

What you will get with this upgrade?
NEW FILAMENT SENSOR
The previous sensor didn’t work well with some specific filaments. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.
 
EASIER SERVICE
Thanks to completely reworked extruder you don’t have to take apart the whole extruder if you want to change the nozzle or PTFE tube. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. Better Y axis belt tensioning is just the icing on the cake.
 
BETTER COOLING
Thanks to the better design of the whole extruder, air flow is increased and as a result, cooling capabilities are improved. We have also focused on cooling of the the printed object and MK2.5S/MK3S is better for printing from flexible materials.
 
 
Package listing:
 
 
1.The kit contains what is in the BOM:
 
V slots 1x331mm + 331mm + 290mm, 2x359mm + 370mm
Tee-nuts M5-31x
M5*30-16x
M5 spring pad-16x
M5x8mm low profile screw-4x
M5x10mm low profile screw-17x
M5x12mm low profile screw-14x
Self Tapping Screw M5 - 4x
Set screw 4mm M5 - 8x
M3x12mm socket head screw (hex) - 10x
Zip ties 2.5x100mm -20x
2.Y carriage*1
3.370mm smooth rods*2+330mm smooth rods*2+320mm smooth rods*2
4.MK52 magnetic heated bed*1+steel sheet*1+PEI*2
5.30CM Textile Sleeve Cable Wire*1
6.Motor kit-Nema 17 stepper motor and z axis 320mm motor
7.IR filament sensor + cable(SET)
8.power panice with cable and switch*1
9.P.I.N.D.A V2 *1
10.power supply*1
11.Stainless Steel U-bolts*3
12.LM8UU*10
13.Antivibration Feet*4
14.4010 FAN*1
15.5015 FAN*1
16.HeatSink Extruder Radiator Kit*1
17.50CM Textile Sleeve Cable Wire*1
18.HT-NTC100K Thermistor Temperature Sensor 1m *1
19.24V 50W Ceramic Cartridge Heater 1M*1
20.1 M PTFE Tube Teflonto
21.drive gear extruder kit
22.2m belt with 2pcs pulley
23.623h*2
24.aluminum spacer*9
25. 1set the whole screw nut kit
26.  1M*PTFE tube
27. Einsy board+1*2004LCD
 

Attension:

Don't including Printed parts

You can print it by the link:

https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/full_upgrade/for_mk3/printed_parts/stl

Buyers are requested to solve the customs clearance problem themselves. If they return due to customs clearance, all the costs incurred will be borne by the buyer. If you need help, please contact customer service before placing an order.

02

IMG_8146IMG_8147IMG_8148IMG_8149IMG_8150IMG_8151IMG_8153

 

 

 

 

 

 

 

    V slots 1x331mm + 331mm + 290mm, 2x359mm + 370mm
    Tee-nuts M5-31x
    M5*30-16x
    M5 spring pad-16x
    M5x8mm low profile screw-4x
    M5x10mm low profile screw-17x
    M5x12mm low profile screw-14x
    Self Tapping Screw M5 - 4x
    Set screw 4mm M5 - 8x
    M3x12mm socket head screw (hex) - 10x
    Zip ties 2.5x100mm -20x

Clone Prusa i3 MK3S Printer Full Kit 3D Printer DIY Bear MK3S Including Einsy-Rambo Board Prusa i3 MK3 To MK3S Upgrade Kit

01

What you will get with this upgrade?
NEW FILAMENT SENSOR
The previous sensor didn’t work well with some specific filaments. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.
 
EASIER SERVICE
Thanks to completely reworked extruder you don’t have to take apart the whole extruder if you want to change the nozzle or PTFE tube. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. Better Y axis belt tensioning is just the icing on the cake.
 
BETTER COOLING
Thanks to the better design of the whole extruder, air flow is increased and as a result, cooling capabilities are improved. We have also focused on cooling of the the printed object and MK2.5S/MK3S is better for printing from flexible materials.
 
 
Package listing:
 
 
1.The kit contains what is in the BOM:
 
V slots 1x331mm + 331mm + 290mm, 2x359mm + 370mm
Tee-nuts M5-31x
M5*30-16x
M5 spring pad-16x
M5x8mm low profile screw-4x
M5x10mm low profile screw-17x
M5x12mm low profile screw-14x
Self Tapping Screw M5 - 4x
Set screw 4mm M5 - 8x
M3x12mm socket head screw (hex) - 10x
Zip ties 2.5x100mm -20x
2.Y carriage*1
3.370mm smooth rods*2+330mm smooth rods*2+320mm smooth rods*2
4.MK52 magnetic heated bed*1+steel sheet*1+PEI*2
5.30CM Textile Sleeve Cable Wire*1
6.Motor kit-Nema 17 stepper motor and z axis 320mm motor
7.IR filament sensor + cable(SET)
8.power panice with cable and switch*1
9.P.I.N.D.A V2 *1
10.power supply*1
11.Stainless Steel U-bolts*3
12.LM8UU*10
13.Antivibration Feet*4
14.4010 FAN*1
15.5015 FAN*1
16.HeatSink Extruder Radiator Kit*1
17.50CM Textile Sleeve Cable Wire*1
18.HT-NTC100K Thermistor Temperature Sensor 1m *1
19.24V 50W Ceramic Cartridge Heater 1M*1
20.1 M PTFE Tube Teflonto
21.drive gear extruder kit
22.2m belt with 2pcs pulley
23.623h*2
24.aluminum spacer*9
25. 1set the whole screw nut kit
26.  1M*PTFE tube
27. Einsy board+1*2004LCD
 

Attension:

Don't including Printed parts

You can print it by the link:

https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/full_upgrade/for_mk3/printed_parts/stl

Buyers are requested to solve the customs clearance problem themselves. If they return due to customs clearance, all the costs incurred will be borne by the buyer. If you need help, please contact customer service before placing an order.

02

IMG_8146IMG_8147IMG_8148IMG_8149IMG_8150IMG_8151IMG_8153

 

 

 

 

 

 

 

    V slots 1x331mm + 331mm + 290mm, 2x359mm + 370mm
    Tee-nuts M5-31x
    M5*30-16x
    M5 spring pad-16x
    M5x8mm low profile screw-4x
    M5x10mm low profile screw-17x
    M5x12mm low profile screw-14x
    Self Tapping Screw M5 - 4x
    Set screw 4mm M5 - 8x
    M3x12mm socket head screw (hex) - 10x
    Zip ties 2.5x100mm -20x
size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.