FYSETC Crawler PEI Powder Steel Plate High Temperature Printing Upgraded Sheet for CREALITY CR30

YOUTUBE INSTALLATION VIDEO: https://youtu.be/QhZSjL3R7Qw

1. Name: Crawler PEI Powder Steel Plate

2. Material: PEI powder coating

3. Temperature resistance: PEI powder coating (maximum temperature 260°C)

4. Compatible models: CREALITY CR-30

5. Advantages:

1) The steel plate is resistant to high temperature. Compared with the original track, it is made of rubber, which is more resistant to high temperature. There is no need to worry about the damage to the track caused by the high temperature of the nozzle.

2) The surface adopts PEI powder coating, which has better adhesion when heated and easier demoulding when cooled.

3) The bottom has coarse sand texture, which makes the bottom more beautiful.

6. Precautions (there are gloves inside the package, you must wear gloves before use)

1) After replacing the track steel plate, it is necessary to adjust the width limit of the track roller to make the distance between them appropriate.

2) After replacing the track steel plate, it is necessary to readjust the tightness of the track steel plate of the printer, so that the locking is appropriate, and the steel plate is close to the heating bed, but it should not be too tight, so as not to cause the steel plate to be broken due to excessive tightness. The front of the steel plate prevents improper operation, which may cause the steel plate to hurt people.

3) After replacing the track steel plate, the printer needs to be re-leveled, and the leveling method remains unchanged.

4) In order to make the weld smooth, the color of the weld has color difference.

5) The nozzles on the first floor cannot scratch the platform, otherwise the nozzles will scratch the platform and wear out the nozzles.

6) When the first layer is printed, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform