$30.99
$20.76
FYSETC F6 V1.3 Board ALL-in-one Electronics Up to 6 Motor Drivers For TMC2130 SPI Free VS SKR V1.3 S6 For 3D Printer CNC Ender 3 Product Introduction   The FYSETC...
FYSETC F6 V1.3 Board ALL-in-one Electronics Up to 6 Motor Drivers For TMC2130 SPI Free VS SKR V1.3 S6 For 3D Printer CNC Ender 3 Product Introduction   The FYSETC...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 660 In Stock
FYSETC F6 V1.3 Board ALL-in-one Electronics Up to 6 Motor Drivers For TMC2130 SPI Free VS SKR V1.3 S6 For 3D Printer CNC Ender 301
Product Introduction
 
The FYSETC F6 board is a feature rich all-in-one electronics solution for 3D printer and other CNC devices. It provides six drivers slots and supports Pololu pin compatible stepper drivers, especially the TMC drivers modules. There is no need for flying wires when using TMC2100, TMC2130 SPI,and pther pin configer functions are available.
 
 
Features
 
• Compact size: 127.35mm x 92mm
 
• fully integrated all in one solution:
 
– Arduino 2560-R3 compatible (works with Sprinter, Repetier-Firmware, Marlin out of the box)
 
– CH340 for high speed USB serial connection
 
• UNIVERSAL POWER:
 
– can be used with 9V-28V for motors / heated bed
 
– integrated high precision power regulators (DC/DC): 5V 3A Max
 
– power input auto selector for ATmega/logic (stand alone or power from USB)
 
• Easy DISPLAY + SD-CARD connector:
 
– RepRapDiscount SmartController compatible pin header on board
 
– 10P FPC for Serial Touch display
 
– 2X4 PinHeader Out for SD Card moudle
 
• Up to 6 motor drivers with easy micro-steps setup and Supports TMC driver without flying wire
 
• 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
 
• The Hot-Bed is designed as a separate power input for maximum current
 
• All unused pins are led out by pin headers
 
• On Board External 2Mb SPI Flash
 
• PCB:
 
– 4 layer
 
– 2OZ copper inner layers,1OZ out layers
 
– High quality, High temperature FR4-TG130 PCB
 
– Gold ENIG finishing
 
If you have any questions about using the method,please refer to the link:
   
If you have any question about using the board in Ender-3,you can refer it

https://www.youtube.com/watch?v=cJMsqyWJYMU&feature=youtu.be&fbclid=IwAR2VcBigxn6pqpf_VUpfoK4JVHrOwUTyLiZyyQMnOgmURzNwyhDcELkvGT8  

if you have want a case of the board,you can refer the link 
 https://www.thingiverse.com/thing:3589655  
 
Package listing:
1pc  F6 V1.3
1pc  USB
1set  Jumper
4pcs 2pin MX2.54
9pcs 3pin MX2.54
8pcs 4pin MX2.54
 
02
IMG_6082IMG_6084IMG_6086IMG_6081IMG_6080IMG_6087IMG_6088

 

 

 

 

 

FYSETC F6 V1.3 Board ALL-in-one Electronics Up to 6 Motor Drivers For TMC2130 SPI Free VS SKR V1.3 S6 For 3D Printer CNC Ender 301
Product Introduction
 
The FYSETC F6 board is a feature rich all-in-one electronics solution for 3D printer and other CNC devices. It provides six drivers slots and supports Pololu pin compatible stepper drivers, especially the TMC drivers modules. There is no need for flying wires when using TMC2100, TMC2130 SPI,and pther pin configer functions are available.
 
 
Features
 
• Compact size: 127.35mm x 92mm
 
• fully integrated all in one solution:
 
– Arduino 2560-R3 compatible (works with Sprinter, Repetier-Firmware, Marlin out of the box)
 
– CH340 for high speed USB serial connection
 
• UNIVERSAL POWER:
 
– can be used with 9V-28V for motors / heated bed
 
– integrated high precision power regulators (DC/DC): 5V 3A Max
 
– power input auto selector for ATmega/logic (stand alone or power from USB)
 
• Easy DISPLAY + SD-CARD connector:
 
– RepRapDiscount SmartController compatible pin header on board
 
– 10P FPC for Serial Touch display
 
– 2X4 PinHeader Out for SD Card moudle
 
• Up to 6 motor drivers with easy micro-steps setup and Supports TMC driver without flying wire
 
• 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
 
• The Hot-Bed is designed as a separate power input for maximum current
 
• All unused pins are led out by pin headers
 
• On Board External 2Mb SPI Flash
 
• PCB:
 
– 4 layer
 
– 2OZ copper inner layers,1OZ out layers
 
– High quality, High temperature FR4-TG130 PCB
 
– Gold ENIG finishing
 
If you have any questions about using the method,please refer to the link:
   
If you have any question about using the board in Ender-3,you can refer it

https://www.youtube.com/watch?v=cJMsqyWJYMU&feature=youtu.be&fbclid=IwAR2VcBigxn6pqpf_VUpfoK4JVHrOwUTyLiZyyQMnOgmURzNwyhDcELkvGT8  

if you have want a case of the board,you can refer the link 
 https://www.thingiverse.com/thing:3589655  
 
Package listing:
1pc  F6 V1.3
1pc  USB
1set  Jumper
4pcs 2pin MX2.54
9pcs 3pin MX2.54
8pcs 4pin MX2.54
 
02
IMG_6082IMG_6084IMG_6086IMG_6081IMG_6080IMG_6087IMG_6088

 

 

 

 

 

size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat.