Accessories

### Expanded Contact Surface Largely Improve Residue Clearing Effect Wider silicone wiping zone vs original factory part, fully wrap nozzle outer circle to remove oozed filament and stringing thoroughly. ### Customizable Cuttable Bulk Silicone Sheet Included For Free Adjustment Supplementary large-size silicone mat can...

### Dual-layer Independent Filtration Structure(Front HEPA13 + Back Activated Carbon) Front pleated HEPA13 media traps 99.95% ultrafine plastic particles & PM2.5; rear honeycomb activated carbon eliminates VOC gas and printing odor separately. ### Surrounding Elastic Black Foam Sealing Edge High-density sponge wraps full perimeter...

### P2S Printer Exclusive Fit Designed specifically for Bambu Lab P2S 3D printer, matching the hotend’s installation position and interface perfectly. ### Complete Integrated Unit Integrates the heating element and temperature sensor into one assembly, ensuring accurate and responsive temperature control. ### Standard Length...

### Dual Layer Two-stage Filtration Structure HEPA13 front layer traps ultrafine particles, back activated carbon layer absorbs TVOC, formaldehyde and printing odor. ### High Density Honeycomb Activated Carbon Honeycomb porous charcoal owns bigger adsorption space, longer usage cycle than common loose carbon filter. ###...

### 16 Channel Filament Convergence Features 16 inlet ports for multi-color filaments, converging them into a single output path. ### Perfect Fit for Kobra 3 Series Designed to match the installation position of Anycubic Kobra 3/Kobra 3 Max/S1/S1C 3D printers. ### Precision Size for...

### Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. ### Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break...

### Overview This double-ended 4-pin LED connection cable is a 17 cm replacement wire for the print-head lighting circuit. Both ends use matching white 4-pin connectors for a direct cable replacement. ### Compatibility Anycubic Kobra 3 Combo print head LED connection

### Pre-assembled Output Drive Gear Drive pinion gear fixed on motor shaft, consistent tooth specification with original part for smooth filament pushing. ### Custom 4Pin Color Coded Cable & Plug Equipped with fixed-length 3.10inch 4-color lead wire + matching white terminal connector, plug and...

### Direct Replacement for Flashforge AD5X Designed as an exact replacement for the original fan adapter board on Flashforge AD5X 3D printers. ### Full Signal Compatibility Supports all 4 fan signals (GND, FG, PWM, V), ensuring proper speed control and fan detection. ### Simplified...

### Perfect Fit for Bambu Lab A1 / A1 mini Specifically designed for Bambu Lab A1 and A1 mini 3D printers, matching the original extruder structure for seamless replacement and installation. ### High Durability with Hardened Steel & Brass Construction Made of premium brass...

### Perfect fit for Flashforge AD5X extruder hotend Prevents Heat Creep and Nozzle Clogs： This 2510 cooling fan is mounted on the hotend heatsink to dissipate heat from the throat area. By keeping the cold side of the extruder cool, it prevents filament from...

### Expand to 5 Filament Channels This adapter expands the single filament inlet on your Bambu Lab A1/A1 Mini to 5 independent feeding ports, allowing you to connect up to 5 different filaments for multi-color printing. ### Compatible with A1/A1 Mini Precision-designed for perfect...

### Automated Filament Cutting for Multi-Color Printing Triggered by filament movement, this mechanical cutter automatically severs 1.75mm filament during swaps, preventing nozzle clogs and improving print reliability. ### Complete DIY Assembly Kit Includes all necessary parts: cutter blade, M6 pneumatic fittings, magnets, screws, and...

### HD Clarity & High Touch Sensitivity Made of high-transparency material, the protector maintains original display clarity and touch responsiveness, ensuring smooth operation. ### Anti-Scratch & Wear-Resistant The hard-coat surface effectively resists daily scratches, abrasions and dust, extending the life of your printer screen....

### Exact Fit for Anycubic Kobra S1C 3D Printer Specifically designed for Anycubic Kobra S1C with perfect size matching, including 485mm long 10x6.5mm drag chain, mounting bracket, screws and tools for seamless installation. ### High Toughness & Wear-Resistant Material Made of high-quality engineering plastic,...

### Overview This AMS filament inlet replacement kit contains the small spring and metal inlet components shown for restoring the filament entry mechanism. Its compact parts are intended to replace worn or missing inlet hardware. ### Compatibility Bambu Lab X1, P1, and A1 Series...

### Perfect Fit for Anycubic Kobra X Precision cut to match the original X-axis (84cm) and Y-axis (81cm) belt lengths, direct replacement without modification. ### High Precision GT2 Tooth Profile Standard 2mm pitch, 6mm width design ensures accurate power transmission, eliminating slipping and improving...

### Full Metal Upgrade for Bambu Lab Extruder Replaces the original gears with high-grade brass drive gear and hardened steel idler gear, solving the common issue of gear wear and filament slipping in long-term printing. ### Wear-Resistant and Long-Lasting Performance Brass gears feature excellent...

### Original Replacement Strain Gauge Exact fit for Anycubic Kobra X series 3D printers, restores the original auto bed leveling function with zero modification. ### High Precision Bed Leveling Delivers accurate Z-axis contact detection, ensuring consistent first-layer adhesion and eliminating print failures from uneven...

### Notice Only compatible with Flashforge AD5X 3D printer, not suitable for other models. ### Package Content 1 set heating assembly kit (thermistor, heating cartridge, hot end metal clip)4pcs fixing screws. ### Practical Quick-change Design Used to fasten heater block and heating base, realize...