-
FYSETC Magnetic Sticker for Creality K1 MAX 317x312mm 1.5mm Thick Soft Magnetic Base Heat Resistant Strong Magnetic Hold 3D Printer Part
- Regular price
- $29.00
- Regular price
-
- Sale price
- $29.00
- Unit price
- per
### Strong Magnetic Hold This magnetic sticker provides powerful magnetic force to securely hold PEI spring steel plates in place during printing . No more shifting or warping. Your build plate stays firmly fixed throughout the entire print process. ### Perfect Fit for K1...- Regular price
- $29.00
- Regular price
-
- Sale price
- $29.00
- Unit price
- per
-
Display Connection Cable for Creality SPARKX I7 3D Printer FPC Ribbon Flex Cable Gold Plated Contacts Touchscreen Replacement
- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
### Perfect Fit for SPARKX i7 Display This flex cable is specifically designed for Creality SPARKX i7 3D printer. It connects the 2.85-inch color touchscreen to the mainboard with precise length of 280mm, ensuring a perfect fit and stable connection. ### Gold-Plated Contacts for...- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
-
1200mm Total Length Dual Pre-crimped Plug Print Head Cable for Creality K2 Pro 3D Printer Thick Flexible Rubber Sheath
- Regular price
- $18.00
- Regular price
-
- Sale price
- $18.00
- Unit price
- per
### Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. ### Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break...- Regular price
- $18.00
- Regular price
-
- Sale price
- $18.00
- Unit price
- per
-
Silicone Sock for Creality K2 Plus and Hi Combo Hotend Heating Block Insulation Cover Heat-Resistant Silicone Nozzle Accessories
- Regular price
- $6.00
- Regular price
-
- Sale price
- $6.00
- Unit price
- per
- Regular price
- $6.00
- Regular price
-
- Sale price
- $6.00
- Unit price
- per
-
Filament Runout and Cutter Detection Board V07 No Driver for Creality SPARKX i7 3D Printer Dual Function Sensor Module
- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
### 2-in-1 Dual Protection Function This detection board integrates two essential monitoring functions - filament runout detection and cutter wear monitoring. When filament breaks or runs out, it triggers an automatic pause; when cutter status is abnormal, it sends alerts to prevent print failures....- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
-
Toolhead Wiring Cable Loom for Creality K2 Plus 3D Printer
- Regular price
- $16.50
- Regular price
-
- Sale price
- $16.50
- Unit price
- per
### Plug and Play Precision Fit This toolhead cable is engineered to Creality's original factory specifications for the K2 Plus printer. The connectors align perfectly with the mainboard and toolhead ports, requiring no manual pin adjustments or firmware changes. Simply plug in and your...- Regular price
- $16.50
- Regular price
-
- Sale price
- $16.50
- Unit price
- per
-
0.4mm Hotend for Creality SPARKX i7 3D Printer Quick Swap All in One Hotend Assembly Replacement Part
- Regular price
- $14.00
- Regular price
-
- Sale price
- $14.00
- Unit price
- per
### 0.4mm Universal Nozzle Size This 0.4mm hotend is the most versatile choice for everyday 3D printing. It works with PLA ABS PETG TPU and most other filaments, delivering a great balance between print quality and speed . ### Quick Swap Design The i7...- Regular price
- $14.00
- Regular price
-
- Sale price
- $14.00
- Unit price
- per
-
Z Axis Stepper Motor for Creality K2 K2 Pro M300 3D Printer With Pre-installed Timing Pulley and Fixing Screws
- Regular price
- $30.50
- Regular price
-
- Sale price
- $30.50
- Unit price
- per
Model Specific Size For K2 / K2 Pro / M300 Z Axis 42mm square flange, 45mm stack height, mounting hole spacing matches original Z-axis motor seat directly. Pre-assembled Standard Timing Pulley Finished synchronous gear fixed on motor shaft, matches original belt pitch for smooth...- Regular price
- $30.50
- Regular price
-
- Sale price
- $30.50
- Unit price
- per
-
X Axis Limit Switch for Creality i7 3D Printer Mechanical Endstop Sensor Replacement Part for X Axis Homing
- Regular price
- $8.00
- Regular price
-
- Sale price
- $8.00
- Unit price
- per
- Regular price
- $8.00
- Regular price
-
- Sale price
- $8.00
- Unit price
- per
-
Creality Silencer Grease for 3D Printer Lubricant 10g Noise Reduction Anti Wear Lubrication for Screw Guide Rail Gear Bearing
- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
### Noise Reduction This lithium soap based lubricant effectively reduces friction noise during printer operation. It ensures smooth and quiet printing performance, significantly improving your printing experience. ### Wear Protection and Anti Rust The high lubricity formula reduces friction and wear on mechanical components....- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
-
Filament Detection Board for Creality K2 K2 Pro K2 Plus 3D Printer With White Terminal Connector Extruder Break Detection Replacement
- Regular price
- $13.50
- Regular price
-
- Sale price
- $13.50
- Unit price
- per
- Regular price
- $13.50
- Regular price
-
- Sale price
- $13.50
- Unit price
- per
-
1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement
- Regular price
- $17.00
- Regular price
-
- Sale price
- $17.00
- Unit price
- per
### Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. ### Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame...- Regular price
- $17.00
- Regular price
-
- Sale price
- $17.00
- Unit price
- per
-
Hotend Adapter Board for Creality K2 K2 Pro K2 Plus With Fixing Screw Extruder Heater and NTC Sensor Connection
- Regular price
- $6.50
- Regular price
-
- Sale price
- $6.50
- Unit price
- per
- Regular price
- $6.50
- Regular price
-
- Sale price
- $6.50
- Unit price
- per
-
High Precision Strain Gauge for Creality K1 SE 3D Printer With 250mm 4Pin Lead Wire Extruder Force Sensing Replacement
- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
-
Double End Preassembled Plug Print Head Cable for Creality K2 3D Printer Thick Flexible Rubber Sheath Wire Harness
- Regular price
- $19.00
- Regular price
-
- Sale price
- $19.00
- Unit price
- per
### Dual Pre-crimped Standard Terminal Plug Both cable ends finished with original-spec plug connector, no wire stripping or soldering needed for direct installation. ### Thick Wear-resistant Rubber Outer Sheath Flexible thick rubber jacket improves bending resistance, effectively avoid inner core breakage caused by long-term...- Regular price
- $19.00
- Regular price
-
- Sale price
- $19.00
- Unit price
- per
-
High Temperature Ceramic Heating Tube for Creality K2 Plus 3D Printer 350℃ NTC Thermistor Complete Kit
- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
### Complete Hotend Temperature Control Set Includes one ceramic heating tube and one 350℃ thermistor, a full set for hotend temperature maintenance. ### High Temperature Resistant Thermistor Thermistor rated for 350℃ maximum temperature, designed to work with high-temperature printing filaments. ### Precision Fit for...- Regular price
- $9.00
- Regular price
-
- Sale price
- $9.00
- Unit price
- per
-
V21 Version Spec Toolhead Control Board for Creality K2 SE 3D Printer with 2pcs Mounting Screws Exclusive
- Regular price
- $26.50
- Regular price
-
- Sale price
- $26.50
- Unit price
- per
### Full-function Multi-port Integrated Layout Pre-reserved independent connectors for heating cartridge, thermistor, filament cut module, material runout sensor, cooling fan and print head camera. ### Precise Standard Dimension Parameter Finished fixed size: 43mm×39mm×7.4mm, fully fit original print head inner installation cavity without space modification....- Regular price
- $26.50
- Regular price
-
- Sale price
- $26.50
- Unit price
- per
-
Filament Runout Sensor Kit for Creality Ender 3 V3 SE/KE 3D Printer
- Regular price
- $21.50
- Regular price
-
- Sale price
- $21.50
- Unit price
- per
### Direct Fit for Ender 3 V3 SE/KE Designed specifically for Creality Ender 3 V3 SE and V3 KE printers, including the sensor, custom mounting bracket, and all required cables. ### Prevent Failed Prints The sensor detects filament runout, breakage, or jams in real...- Regular price
- $21.50
- Regular price
-
- Sale price
- $21.50
- Unit price
- per
-
Screen Cable for Creality K2 / K2 Pro
- Regular price
- $11.00
- Regular price
-
- Sale price
- $11.00
- Unit price
- per
### Exact Fit for Creality K2 / K2 Pro Specifically designed for Creality K2 and K2 Pro printers, this FPC cable perfectly matches the original LCD and mainboard connectors for direct replacement. ### High-Quality Durable Material Made of premium FPC material with reinforced insulation,...- Regular price
- $11.00
- Regular price
-
- Sale price
- $11.00
- Unit price
- per
-
Filament Runout Sensor Module for Creality K2 / K2 Pro / K2 Plus
- Regular price
- $8.50
- Regular price
-
- Sale price
- $8.50
- Unit price
- per
### Perfect Compatibility for Creality K2 Series Specifically designed for Creality K2 / K2 Pro / K2 Plus 3D printers, matching the original extruder front cover structure for seamless installation. ### High-Precision Filament Runout Detection Built-in sensitive optical sensor accurately monitors filament presence, automatically...- Regular price
- $8.50
- Regular price
-
- Sale price
- $8.50
- Unit price
- per
Currency

