Cables & Connectors-total
-
4P Double-end Same Terminal LED Connect Wire for Anycubic Kobra 3 Combo Print Head Lighting Circuit Replacement
Overview This double-ended 4-pin LED connection cable is a 17 cm replacement wire for the print-head lighting circuit. Both ends use matching white 4-pin connectors for a direct cable replacement. Compatibility Anycubic Kobra 3 Combo print head LED connection- $6.00 USD
- $6.00 USD
- Unit price
- per
View details -
1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement
Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...- $17.00 USD
- $17.00 USD
- Unit price
- per
View details -
FTH Board FPC Cable For Bambu Lab P2 Series 3D Printer Extruder Mainboard Signal Connection Replacement
Overview This FTH board FPC cable connects the TH board to the extrusion interface board on the Bambu Lab P2 Series. The flat cable has gold contacts, reinforced ends, and a pictured size of 49.5 mm × 9.9 mm. Compatibility Bambu Lab P2 Series...- $7.00 USD
- $7.00 USD
- Unit price
- per
View details -
High Precision Strain Gauge for Creality K1 SE 3D Printer With 250mm 4Pin Lead Wire Extruder Force Sensing Replacement
Overview High precision strain gauge replacement for Creality K1 SE uses a 34 mm × 34 mm sensor plate with a 250 mm 4-pin lead wire for extruder force sensing and bed/nozzle pressure detection. Compatibility Creality K1 SE- $9.00 USD
- $9.00 USD
- Unit price
- per
View details -
2M 6Pin Male to Female AMS Extension Data Cable With Ferrite Core for Bambu Lab X1 P1 Series AMS Hub Buffer Connection
6Pin Original Standard Pin Definition Same pin layout as original factory cable, full compatible with P1P/P1S/X1/X1C/X1E all AMS variants. 2000mm Extra Long Total Length 2m full length freely realize multi-AMS stacking, AMS to hub / buffer / AMS2Pro remote layout. Built-in Ferrite Suppression Core...- $12.00 USD
- $12.00 USD
- Unit price
- per
View details -
1200mm Total Length Dual Pre-crimped Plug Print Head Cable for Creality K2 Pro 3D Printer Thick Flexible Rubber Sheath
Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break performance under...- $18.00 USD
- $18.00 USD
- Unit price
- per
View details -
Double End Preassembled Plug Print Head Cable for Creality K2 3D Printer Thick Flexible Rubber Sheath Wire Harness
Dual Pre-crimped Standard Terminal Plug Both cable ends finished with original-spec plug connector, no wire stripping or soldering needed for direct installation. Thick Wear-resistant Rubber Outer Sheath Flexible thick rubber jacket improves bending resistance, effectively avoid inner core breakage caused by long-term print head...- $19.00 USD
- $19.00 USD
- Unit price
- per
View details -
Y-axis Limit Endstop Sensor for Flashforge AD5X 3D Printer with 285mm Long Cable 3Pin Terminal Position Detecting Module
AD5X Exclusive Fit Designed specifically for Flashforge AD5X 3D printer Y-axis, matching the installation position and interface perfectly. Standard Size & Specification Sensor board size 33.3×15.9mm with 285mm total cable length, conforming to the original printer’s parameters. Stable Circuit Design Built with complete circuit...- $7.00 USD
- $7.00 USD
- Unit price
- per
View details -
Display Connector Cable for Bambu P1 Series 3D Printer High Speed Power Data SD Card Signal Wire
Perfect Compatibility Exclusively tailored for Bambu P1 series 3D printers, fits the reserved installation position and interface perfectly. Standard Specification Equipped with 16Pin connectors at both ends and measures 9.5cm in total length, conforming to the internal wiring layout of the device. Multi-signal Transmission...- $7.00 USD
- $7.00 USD
- Unit price
- per
View details -
6Pin Display Connection Cable for Qidi Plus 4 3D Printer 1520mm Insulated Power Signal Wiring Harness
Perfect Fit Design Standard 6Pin terminals and 1520mm total length, matches the equipment layout well. Plug and play, no cutting splicing or modification needed. Dual Power and Signal Delivery Transmits power display data and touch control signals simultaneously. Effectively fixes black screen screen flicker...- $9.50 USD
- $9.50 USD
- Unit price
- per
View details -
Chamber Temperature Sensor Complete Kit with Bracket Screws Tool for Bambu Lab P2S 3D Printer
Perfect Replacement Exact match for original part of Bambu Lab P2S 3D printer, plug and play, no modification required. High Precision NTC Probe Delivers stable and accurate chamber temperature data, effectively prevent model warping and layer defects. All-in-One Complete Kit Comes with sensor cable,...- $10.50 USD
- $10.50 USD
- Unit price
- per
View details -
7-in-1 Complete Cable Pack for Bambu Lab 3D Printer H2D/H2C/H2S
Complete 7-in-1 Cable Set Includes all 7 required cables for Bambu Lab H2D/H2C/H2S, covering MC-AC, emergency stop, hall sensor, power supply, interface board and buffer lines, one-stop replacement solution. OEM-Spec Precision Matching Each cable is made to the original length, connector pinout and specification,...- $13.50 USD
- $13.50 USD
- Unit price
- per
View details -
Toolhead Cable for Bambu Lab P2S 3D Printer
Exact Fit for Bambu Lab P2S 3D Printer Specially designed for Bambu Lab P2S, the cable perfectly matches the print head and motherboard connectors for direct replacement. Stable & Reliable Signal Transmission Made of high-quality copper wires with precision contacts, the cable ensures stable...- $11.00 USD
- $11.00 USD
- Unit price
- per
View details -
Drag Chain Cable Management Kit for Anycubic Kobra S1C 3D Printer
Exact Fit for Anycubic Kobra S1C 3D Printer Specifically designed for Anycubic Kobra S1C with perfect size matching, including 485mm long 10x6.5mm drag chain, mounting bracket, screws and tools for seamless installation. High Toughness & Wear-Resistant Material Made of high-quality engineering plastic, the drag...- $9.50 USD
- $9.50 USD
- Unit price
- per
View details -
For Creality K1 K1max Open Drag Chain Bridge Type 6x10mm Cable Carrier with Printparts For K1 K1max 3D Printer
About the Product: Product name: K1/K1 MAX drag chain kit Applicable models: Applicable to K1/K1 MAX series models Contents: Printed parts, screws, nylon small drag chain Printed parts link: https://www.thingiverse.com/thing:6820934- $10.00 USD
- $10.00 USD
- Unit price
- per
View details -
For Bambu Lab p1p Drag Chain Black Openning Type Wire Chains High Quality 3D Printer Parts
Overview This black open-type drag chain guides and protects moving printer wiring along the motion path. Its segmented design provides a replacement cable-management route for the compatible printer. Compatibility Bambu Lab P1P- $16.00 USD
- $16.00 USD
- Unit price
- per
View details -
VORON V0.1 UMBILICAL FRAME TOOL HEAD Include Chamber Temperature Thermistor And Neopixel Support
About the Product https://github.com/VoronDesign/Voron-Hardware/tree/master/V0-Umbilical Designed and open sourced by T. Abraham (Timmit99), this pair of assembled PCB boards offer clean wire management and easy machine service / parts replacement. Additional features include a chamber temperature thermistor and neopixel support. These boards are fully assembled...- from $15.61 USD
- from $15.61 USD
- Unit price
- per
View details -
NTC100K thermistor terminal XH2.54 2PIN male head with terminal cable length 70mm for Sidewinder X1 AND Geniu 3D Printer
Built-in NTC100K thermistor size φ3X5mm terminal XH2.54 2PIN male head with terminal cable length 70mm 3D Printer Parts- $3.96 USD
- $3.96 USD
- Unit price
- per
View details

















