All Metal Resin Drip Stand For Phrozen Sonic Mini Most other 5.5″/6″ LCD UV Photocuring Resin 3D Printers

### Overview

1. Remove the tumbscrew holding the resin vat on the side you want to install the dripstand.
2. Mount the drip stand with the whole to the thread and tighten the thumbscrew again.
3. The drip stand cannot touch your buildplate during printing.
4. After printing move up the buildplatform.
5. Remove the buildplate and hook it to the drip stand.
6. Uncured resin will now drip back into your resin vat.
7. You can close the lid if you want.