Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
## Advantage
- No more 3M Masking tape
- No more glue stic
- No more ABS juice
- No more PEI sheet replacement
- Easy to print
- Easy to remove by bending and popping it off
- Easy to maintain
- Double-sided
- Lower runing cost especially for printing farm
- Genuine PEI powder coating
- Hardened steel spring sheet never diforming
- Make adding inductive Z-probe possible
- Possible to adding ABL for some low-cost printers
## Size
350×350mm / 250×250mm
## Material Compatibility
- PLA
- ABS
- PETG
- TPU
- PVA
- etc.
## Printer Compatibility
- Voron v2.4
- Pulse printer with FlexPlate installation
- Similar bed size printer with Magnetic Base.
## Maintenance
Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.
## Print reference temperature
1. PLA:
**Hot bed:** 50-60 ° C
**Nozzle:** 200-210 ° C
2. ABS:
**Hot bed:** 55-70 ° C
**Nozzle:** 240-250 ° C
3. PETG:
**Hot bed:** 55-70 ° C
**Nozzle:** 240-250 ° C
4. Carbon fiber:
**Hot bed:** 50-60 ° C
**Nozzle:** 200-220 ° C
5. TPU:
**Hot bed:** 50-60 ° C
**Nozzle:** 200-220 ° C
6. Wood:
**Hot bed:** 50-60 ° C
**Nozzle:** 200-220 ° C
Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...