0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
### Link
> https://github.com/emebecnc/Guias/tree/main/StrideMax%20Dual%20FD%20v2%20USB%20%26%20CanBUS%20Mode?fbclid=
### About Products
StrideMax Dual FD is a dual-channel TMC5160 control board that supports 48V. It has both CAN/CANFD and USB interfaces. Multiple modules can be used simultaneously with klipper or RRF to meet the high-speed requirements of 3D printers. It also provides additional temperature measurement, fan control, I/O expansion, and RGB light strip support, which is especially suitable as a Supplement to the general control panel.
### Features
- Dual TMC5160 up to 10A
- Dual car Fuse
- RP2040 MCU,Klipper & RRF Firmware Support
- CAN / CANFD & USB interface
- 60V max Power Supply
- DIN mount case ready
- Onboard heatsink
- Onboard Additional temperature sensor for each MOSFET Array
- 2 x 4Pin controlled Fans,3 x temperature sensor,2 x I/O
0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...