## Print Instructions 1. Adsorb the build plate sheet on the printer hotbed, no need magnetic base. 2. Suggestion of printing filament: - PEY surface suitable for PLA, TPU, PETG, ABS； - PEI surface suitable for PLA /PETG/ABS/TPU/ASA /PVA/PET/PA/PC etc. 3. Suggestion of printing temperature: - PLA/TPU set 60℃~65℃; - PETG set 70℃~80℃; - ABS set 85℃~100℃. 4. PEY and PEI sheet can be work in 160°C~180°C for a long period of time,PEY can not over 180°C,PEI can not over 260°C. 5. Take off the sheet from printing surface and bend the sheet slightly, you can easy to take the model. 6. Use a wet tissue or alcohol tissue clean the plate surface. ## Advantage 1. PEY has star pattern, make the mode beautiful 2. All build plate has double-sided printing surface, convenient and practical, save and protect environment. 3. PEI high temperature resistance, good scratch resistance, adhesive strongly. 4. No glue, easy to use. 5. Anti-warping and strong stickiness. 6. Stainless spring steel, good flatness, easy to take the mode. 7. Easy to clean, just wipe it off with a wet tissue or alcohol before printing. | | PEY Front | PEI Back | |---|---|---| | **temperature** | PEY Suggested temperature of 120°C, maximum 180°C | PEI Suggested temperature of 260°C, maximum 300°C | | **Texture / pattern** | Smooth surface with star pattern | Yellow textured surface | | **printable** | PLA / PETG / ABS / TPU
PEY surface printing ABS or PETG warping edge need to seal or glue | PLA / PETG / ABS / TPU / ASA / PVA / PET / PA / PC etc | > **material:** PEY coating + spring stell plate + PEL coating