Prusa

Overview These E3D V6 black hardened steel nozzles are made for high-temperature and wear-resistant printing with 1.75 mm filament. The images show 0.3 mm, 0.4 mm, and 0.6 mm outlet sizes, a 12.5 mm body length, 7 mm hex, and high-precision black hardened steel...

Print Instructions Adsorb the build plate sheet on the printer hotbed, no need magnetic base. Suggestion of printing filament: PEY surface suitable for PLA, TPU, PETG, ABS； PEI surface suitable for PLA /PETG/ABS/TPU/ASA /PVA/PET/PA/PC etc. Suggestion of printing temperature: PLA/TPU set 60℃~65℃; PETG set...

New website for downloading A1 sealed carton printouts: https://www.thingiverse.com/thing:7091008 New website for downloading AMS sealed carton printouts: https://www.thingiverse.com/thing:7091007Printer box sealing Applicable models: A1/A1MINI, SV07, Ender3, Prusa, etc. And machines with a width of less than 490mm, a depth of less than 520mm, and a...

Overview This 24V 40W hotend heating kit includes a 6 mm × 12 mm heater cartridge, thermistor, and metal heating block. The wired components replace the compatible hotend heater assembly. Compatibility Prusa MK4

packing list: Item Quantity heating block 1* Silicone cover 1* Thermistor 1* heating rod 1* split pipe 1* E3D V6 0.4mm brass nozzle 1* E3D V6 0.4mm hardened steel nozzle 1* Temperature measuring line 1*

Overview This ceramic heating core kit combines a high-temperature ceramic ring with a heater, thermistor, throat, and related hotend hardware. The pictured ceramic ring is intended for cyclic heating and is marked for temperatures up to 320 °C. Compatibility Prusa MK4 and Prusa XL...

Anti-Vibration Feet For: Bambu lab kit X1 Carbon P1S P1P X1 X1E A1 A1 mini Creality K1 Series Prusa Mk3/Mk4 Voron kit 3D Printer Kit.

Overview This Prusa MK4 LED light bar kit adds bright, even illumination to the printer frame. The images show two 290 mm light bars, uniform light emission with no dark areas, low 4W power use, switch wiring, brackets, screws, cable ties, and installed lighting...

4010 FAN Dual Ball 5v 0.3V Speed：8000rpm Three Wire Fan Cable length 110mm 5010 FAN Dual Ball 5v 0.3V Speed：5900rpm Three Wire Fan Cable length 150mm

For use on MK4 only. NTC 100k Thermal, Wire length 60cm. Using resistance-temperature characteristics to measure temperature, control temperature and temperature compensation of components, devices and circuits

Details Suitable for: Prusa Mini Size:2.8 inch Package list: 1pcs display,1 pcs connection cable

About the product Every Material, No Compromise. From normal PLA to PEEK, even to Carbon Fiber reinforced materials, Silicon Carbide Nozzle could meet all the printing requirements of any material. Adaptation Models Phaetus Hotends E3D Hotends Creality Hotends Customized Hotends Applicable Filament From normal...

Compatibility: Ender 3 √ Ender 3 Pro √ Ender 3 S1 pro √ Ender 3 V2 √ CR10 √ CR10s √ CR-10 V2 √ CR-10S Pro √ Ender 5 √ Ender 5 Plus √ Ender 3 S1 √ X1 √ P1P √ P1S √...

Overview This copper and titanium alloy hotend throat features a threaded copper end and long metal tube. It replaces the heatbreak in compatible Prusa MK4 and XL hotend assemblies. Compatibility Prusa MK4 and Prusa XL

Overview This copper and titanium alloy hotend throat is a slender replacement heatbreak with a threaded copper end. It is designed for the compatible MK4 hotend assembly. Compatibility Prusa MK4

Overview This black silicone case is a high-temperature replacement cover for the hotend area. The pictured molded design fits around the nozzle assembly to provide a protective silicone barrier. Compatibility Prusa MK4

Overview This Super PINDA 5V auto-leveling sensor probe is made for Prusa printers. The images show an 80 cm cable, 3-pin connector, 35 mm × 8 mm sensor body, blue and black wiring, and included nuts and washers for mounting. Compatibility Prusa i3 MK3S+,...

FYSETC 3 Sets MK3S+ Y-carriage U-bolts 3D Printer Fixings PartsFor Prusa i3 MK3S+ 3D Printer Spare Parts

Overview This cuttable silicone nozzle wiper is an 81 mm × 81 mm × 5 mm pad with dense soft bristles for removing nozzle residue. It can be trimmed to the required size and reused without scratching the nozzle. Compatibility Bambu Lab X1 Carbon,...

Compatibility: Ender 3 √ Ender 3 Pro √ Ender 3 S1 pro √ Ender 3 V2 √ CR10 √ CR10s √ CR-10 V2 √ CR-10S Pro √ Ender 5 √ Ender 5 Plus √ Ender 3 S1 √ X1 √ P1P √ P1S √...