For P1P

Print Instructions Adsorb the build plate sheet on the printer hotbed, no need magnetic base. Suggestion of printing filament: PEY surface suitable for PLA, TPU, PETG, ABS； PEI surface suitable for PLA /PETG/ABS/TPU/ASA /PVA/PET/PA/PC etc. Suggestion of printing temperature: PLA/TPU set 60℃~65℃; PETG set...

Overview This waterproof LED light strip is a replacement lighting part for the printer interior. Its flexible strip format is intended to restore the original illuminated work area. Compatibility Bambu Lab X1 and P1P

Overview This PA12 cooling fan duct kit is made for improving heat dissipation around Bambu Lab P1P, X1, and X1C printers. The images show a black duct body, N52 magnet mounting points, good temperature resistance, good toughness, easy installation, and matching magnet and screw...

About the Products Vibration-absorbing feet are designed to separate the 3D printer from other 3D printers on the same surface by absorbing vibration energy, helping to minimize machine wear caused by vibration. Applicable to Bambu Lab X1 series and P1P. Features When you place...

Overview FYSETC PTFE Bowden tube kit uses 2.5 mm inner diameter and 4 mm outer diameter tubing for 1.75 mm filament, with white and transparent gray options for AMS, P1P, and A1 mini filament paths. Compatibility Bambu Lab P1P, AMS, A1 mini

Overview This 1 m blue PTFE tube is made for guiding 1.75 mm filament through Bowden-style extruder paths. The images show a smooth flexible tube with 2.5 mm inner diameter, 4 mm outer diameter, and installed routing on a 3D printer toolhead. Compatibility Bambu...

Dual-layer Independent Filtration Structure(Front HEPA13 + Back Activated Carbon) Front pleated HEPA13 media traps 99.95% ultrafine plastic particles & PM2.5; rear honeycomb activated carbon eliminates VOC gas and printing odor separately. Surrounding Elastic Black Foam Sealing Edge High-density sponge wraps full perimeter to block...

Overview This filament cutter replacement uses a 0.5 mm blade in a compact 10 mm × 20 mm × 6 mm body. It replaces the tool-head cutter when the original blade no longer cuts filament cleanly. Compatibility Bambu Lab X1, X1C, P1S, P1P, A1,...

Maximum Temperature Resistance: 200 degrees Celsius / 392 degrees FahrenheitThe H1H steel plate surface is resistant to temperatures up to 200°C. After extensive testing, we recommend the H1H for printing on PLA / PETG / ABS, if you want to print on other filaments,...

Full Metal Upgrade for Bambu Lab Extruder Replaces the original gears with high-grade brass drive gear and hardened steel idler gear, solving the common issue of gear wear and filament slipping in long-term printing. Wear-Resistant and Long-Lasting Performance Brass gears feature excellent self-lubricating properties,...

Overview FYSETC PEI build plate is a 257 mm × 257 mm double-sided textured sheet for Bambu Lab printers, with a gold textured surface and flexible steel base for reliable adhesion and part removal. Compatibility Bambu Lab X1C, X1, X1E, P1P, P1S, A1

Double Sided Textured PEI Surface This build plate features dual sided black textured PEI powder coating on a 0.5mm spring steel base. When one side shows wear, simply flip it over and use the other side. Doubles the service life compared to single sided...

Overview This black open-type drag chain guides and protects moving printer wiring along the motion path. Its segmented design provides a replacement cable-management route for the compatible printer. Compatibility Bambu Lab P1P

Description Shock-absorbing foot pads are designed to separate the 3D printer from other 3D printers on the same surface by absorbing vibration energy, helping to minimize machine wear caused by vibration. Available for Bambu Lab X1 series and P1 series. Advantage When you place...

Overview This synchronous belt kit is designed for Bambu Lab X1 and P1 series printers. The images show rubber fiberglass belts marked 2M-1142-6, a 1142 mm Z-axis belt, 1442 mm XY-axis belt, 6 mm and 10 mm bandwidth options, heat and aging resistance, and...

About this item Upgraded LED chip, energy and power-saving. Good chip and luminous efficiency, low light wane, long service life. Uniform of luminance, soft light. Installation is very simple, follow the guidelines in our pictures or videos. White light, Upgraded LED light source, stabilized...