FYSETC

Overview High precision strain gauge replacement for Creality K1 SE uses a 34 mm × 34 mm sensor plate with a 250 mm 4-pin lead wire for extruder force sensing and bed/nozzle pressure detection. Compatibility Creality K1 SE

Overview This circular stepper motor is designed for Creality K1 and K1 Max printers. The images show a geared round motor with wired connector, stable operation, high precision, fast response, 1.8° step angle, 0.8A nominal current, 12-tooth gear, low-noise rotation, and technical drawing details....

Overview High quality aluminum cooling block for the Creality Sprite Extruder Pro uses a finned 41 mm × 20 mm × 13 mm heat sink body to help dissipate heat around the hotend throat and support stable extrusion. Compatibility Creality Ender-3 S1 Plus, Ender-3...

Overview This extruder stepper motor is made for Elegoo Neptune 3 Plus and Max printers. The images show a compact motor with 17-tooth brass gear, stable low-noise running, 8.2 cm cable, plug-in connector, and boxed single-motor package. Compatibility Elegoo Neptune 3 Plus and Neptune...

Overview This SV07 extruder stepper motor is designed for Sovol SV07 printers. The images show a square stepper motor with brass gear, white plug connector, 117 mm cable, stable operation, high precision, low-noise running, high-temperature resistance, and fast response. Compatibility Sovol SV07

Overview This ABS printed parts set is made for Voron 2.4 R2 Pro 350 mm builds with the SB Stealthburner toolhead. The images show large red, black, and gray printed part layouts including toolhead shells, ducts, fan plates, brackets, panels, covers, and small mounting...

Overview High sensitivity strain gauge replacement for ELEGOO Centauri Carbon 1 uses a 34 mm × 34 mm sensor body, 4-pin connector, and approximately 240 mm cable for pressure sensing in the EG-CC1 toolhead. Compatibility ELEGOO Centauri Carbon 1, EG-CC1

Overview This synchronous belt kit is designed for Bambu Lab X1 and P1 series printers. The images show rubber fiberglass belts marked 2M-1142-6, a 1142 mm Z-axis belt, 1442 mm XY-axis belt, 6 mm and 10 mm bandwidth options, heat and aging resistance, and...

Complete Hotend Temperature Control Set Includes one ceramic heating tube and one 350℃ thermistor, a full set for hotend temperature maintenance. High Temperature Resistant Thermistor Thermistor rated for 350℃ maximum temperature, designed to work with high-temperature printing filaments. Precision Fit for Creality K2 Plus...

Overview This Hollow MGN9H 50 mm Z2 rail is made for Voron Tap motion assemblies. The images show a compact silver linear rail carriage with a hollow center slot, mounting holes, black end caps, metal rail body, and 50 mm length for lightweight toolhead...

Premium Brass Construction Made of high-quality solid brass, this 90° heat set insert adapter delivers fast, even heat transfer, ensuring consistent heating of the insert without overheating the printed part. Durable and heat-resistant for long-term use. 90° Elbow Design for Hard-to-Reach Spots The right-angle...

Overview This hotbed PEI steel plate limit baffle set helps position the build plate on Voron printers. The images show two black L-shaped metal stops with screw holes, durable metal finish, and red bed strips for plate edge positioning. Compatibility Voron 2.4 and Voron...

Overview This hotend adapter board is made for Creality K2, K2 Pro, and K2 Plus printers. The images show a compact 37 mm × 12 mm PCB with heater, NTC, and fan connectors, labeled ports, mounting holes, and a fixing screw. Compatibility Creality K2,...

Notice Only compatible with Flashforge AD5X 3D printer, not suitable for other models. Package Content 1 set heating assembly kit (thermistor, heating cartridge, hot end metal clip)4pcs fixing screws. Practical Quick-change Design Used to fasten heater block and heating base, realize easy separation of...

Original Specification Ceramic Heater This ceramic heating cable is manufactured to match Anycubic’s original specifications for the Kobra X hotend. It delivers stable and consistent heating performance, ensuring your filament reaches the optimal melting temperature for smooth extrusion. Precise Fit for Kobra X Hotend...

Prevent Heat Creep for Reliable Printing This hotend cooling fan cools the heatsink to prevent heat from traveling upward and softening filament prematurely. Essential for high temperature printing and sealed chamber environments to avoid clogs and jams. 2510 Compact Size Perfect Fit With a...

About this item Compatible with X1 series Bamboo printers only, NOT compatible with P1 series and A1 series. The Cooling Fan for Hot end is used to cool and reduce the temperature of the ceramic heater. Smooth Rotation, No Stuttering, Long Lifespan; Smooth Airflow,...

Precision Original Specification This hotend heating assembly is manufactured to Bambu Lab’s original specifications for the A2L printer. It directly replaces the factory heating component, ensuring stable power delivery and precise temperature control. Up to 300°C High Temperature Support The assembly supports hotend temperatures...

P2S Printer Exclusive Fit Designed specifically for Bambu Lab P2S 3D printer, matching the hotend’s installation position and interface perfectly. Complete Integrated Unit Integrates the heating element and temperature sensor into one assembly, ensuring accurate and responsive temperature control. Standard Length Specification Features 180mm...

Confirmed Compatibility for Kobra X Only This hotend heating kit is precision engineered exclusively for the Anycubic Kobra X FDM 3D printer. It is not compatible with other printer models. Please verify your machine type before ordering to ensure a perfect match. Tool Free...