This textured PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a bottom sheet with adhesive on the back. The PEI comes pre applied. Both sides can be used freely. A Supplement for sticking PEI kit(Asin: B088ZGTPGB) or Janusbps Kit (Asin:B0B3XC9NGP) at our store. Size: 230 x150mm/9.0x5.9 in, compatible with QiD X-pro Flashfoge Creator Makebot Replicato 3D Printer or other similarly sized build plate. Please re-measure your heated bed before ordering, not rely on the build volume or printing size. Made of high quality stainless steel and strong sticker base. Very easy to use, simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. Flexible and Removable. The maximum temperature for printing is about 130℃ on the bed. Just adjust the bed temp according to the printing filament. It behaves as most PEI sheets would and works great with filaments PLA, TPU, PETG, ABS etc. Reference Temperature:PLA 50-60℃(hoted bed), 200-210℃(nozzle); ABS 70-120℃(hoted bed), 240-250℃(nozzle);PETG 60-85℃(hoted bed), 230-245℃(nozzle); Carbonfiber 50-60℃(hoted bed), 200-220℃(nozzle); TPU 50-60℃(hoted bed), 200-220℃(nozzle). If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use. Prints come off the...