Accessories

Overview This X-axis limit switch cable is a mechanical endstop replacement for Creality Sparkx i7 printers. The images show a 110 mm cable, 3-pin connector, compact 14 mm × 9.7 mm PCB, black/gray/white wiring, and two mounting screws for X-axis homing. Compatibility Creality Sparkx...

Core Function This part cooling fan is installed at the toolhead base and works with the air duct to rapidly cool extruded filament right after it leaves the nozzle. It ensures each layer solidifies properly before the next layer is deposited. Print Quality Improvement...

Overview High sensitivity strain gauge replacement for ELEGOO Centauri Carbon 1 uses a 34 mm × 34 mm sensor body, 4-pin connector, and approximately 240 mm cable for pressure sensing in the EG-CC1 toolhead. Compatibility ELEGOO Centauri Carbon 1, EG-CC1

Double Side PUR Sandblast Coating Both sides finished with even temperature sandblast + PUR coating, two available finishes in black and blue for selection. High Elastic Spring Steel Base Material Core substrate adopts spring steel material, outstanding bending resilience, instantly rebound after deformation for...

Expanded Contact Surface Largely Improve Residue Clearing Effect Wider silicone wiping zone vs original factory part, fully wrap nozzle outer circle to remove oozed filament and stringing thoroughly. Customizable Cuttable Bulk Silicone Sheet Included For Free Adjustment Supplementary large-size silicone mat can be trimmed...

Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...

Full Dustproof and Anti Scratch Protection Fully covers the entire Bambu Lab A1 printer, effectively blocking dust ingress while preventing accidental scratches in daily use, keeping the printer looking like new. Visual PVC Transparent Window Features a large 480x350mm transparent PVC window on the...

P2S Printer Exclusive Fit Designed specifically for Bambu Lab P2S 3D printer, matching the hotend’s installation position and interface perfectly. Complete Integrated Unit Integrates the heating element and temperature sensor into one assembly, ensuring accurate and responsive temperature control. Standard Length Specification Features 180mm...

Perfect Fit for Kobra 3 Series Precision-designed filament hub adapter with the same interface as the original part, directly compatible with Anycubic Kobra 3 / Kobra 3 Max / S1 / S1C printers. 5-in-1 Multi-Color Filament Convergence Supports simultaneous connection of 5 filament feeders,...

16 Channel Filament Convergence Features 16 inlet ports for multi-color filaments, converging them into a single output path. Perfect Fit for Kobra 3 Series Designed to match the installation position of Anycubic Kobra 3/Kobra 3 Max/S1/S1C 3D printers. Precision Size for Stable Installation Overall...

Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break performance under...

Overview This double-ended 4-pin LED connection cable is a 17 cm replacement wire for the print-head lighting circuit. Both ends use matching white 4-pin connectors for a direct cable replacement. Compatibility Anycubic Kobra 3 Combo print head LED connection

AD5X Exclusive Fit Designed specifically for Flashforge AD5X 3D printer Y-axis, matching the installation position and interface perfectly. Standard Size & Specification Sensor board size 33.3×15.9mm with 285mm total cable length, conforming to the original printer’s parameters. Stable Circuit Design Built with complete circuit...

Exact Fit for Bambu Lab A1 / A1 Mini Precisely cut to match the screen dimensions of Bambu Lab A1 and A1 mini printers, ensuring full coverage without interfering with touch operations. HD Clarity & High Touch Sensitivity Made of high-transparency material, the protector...

Direct Replacement for Flashforge AD5X Designed as an exact replacement for the original fan adapter board on Flashforge AD5X 3D printers. Full Signal Compatibility Supports all 4 fan signals (GND, FG, PWM, V), ensuring proper speed control and fan detection. Simplified Wiring & Maintenance...

Perfect Fit for Bambu Lab A1 / A1 mini Specifically designed for Bambu Lab A1 and A1 mini 3D printers, matching the original extruder structure for seamless replacement and installation. High Durability with Hardened Steel & Brass Construction Made of premium brass and hardened...

Perfect Fit for Bambu Lab P2S Designed as a direct replacement or spare part for the eddy sensor on Bambu Lab P2S 3D printers. Precise Filament Flow Monitoring Installed between the extruder and hotend, it provides stable, repeatable signals for active filament flow calibration....

Perfect fit for Flashforge AD5X extruder hotend Prevents Heat Creep and Nozzle Clogs： This 2510 cooling fan is mounted on the hotend heatsink to dissipate heat from the throat area. By keeping the cold side of the extruder cool, it prevents filament from softening...

Perfect Compatibility for Creality K2 Series Specifically designed for Creality K2 / K2 Pro / K2 Plus 3D printers, matching the original extruder front cover structure for seamless installation. High-Precision Filament Runout Detection Built-in sensitive optical sensor accurately monitors filament presence, automatically pauses printing...

Perfect Fit for 257×257mm Build Plates Exact size for most 3D printers with 257×257mm build volume, ideal for Bambu Lab and similar models. Strong & Durable Magnetic Force Features strong magnetic force to securely hold PEI sheets, textured or smooth printing plates, making part...