K2 Series

### Plug and Play Precision Fit This toolhead cable is engineered to Creality's original factory specifications for the K2 Plus printer. The connectors align perfectly with the mainboard and toolhead ports, requiring no manual pin adjustments or firmware changes. Simply plug in and your...

### Fix TC2856 Cutter Detection Errors If your K2 Plus printer shows TC2856 error "Cutter issue, the cutter may be jammed or missing", a faulty detection board is often the cause. Replacing this board restores proper blade detection and eliminates false alarms. ### Hall...

### Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. ### Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break...

## Specifications | Attribute | Details | |-----------------------|-------------------------------------------------------------------------| | Model | Unicorn K2P Quick-Swap Nozzle Kit | | Nozzle Diameter | 0.4mm, 0.6mm, 0.8mm | | Package Dimensions | 126.5 × 101 × 15 mm | | Compatible Filaments | PLA, ABS, PETG, TUP,...

### Keep Nozzle Clean for Better Print Quality This nozzle wiper module automatically cleans the nozzle before each print. The metal scraper removes filament residue and prevents buildup, reducing stringing, leaking, and clogs for smoother, more precise prints. ### Original Creality Replacement Part This...

### Overview Heat-resistant silicone sock for Creality K2 Plus and Hi Combo hotends, insulating the heating block to reduce filament buildup, protect against wear, and keep the nozzle area clean. ### Compatibility Creality K2 Plus / Hi Combo

### Full-function Multi-port Integrated Layout Pre-reserved independent connectors for heating cartridge, thermistor, filament cut module, material runout sensor, cooling fan and print head camera. ### Precise Standard Dimension Parameter Finished fixed size: 43mm×39mm×7.4mm, fully fit original print head inner installation cavity without space modification....

### Overview This replacement extruder gear uses hardened steel with a DLC nano-coated surface. The gear is intended for the high-temperature, wear-prone filament drive position on the compatible printer. ### Compatibility Creality K2 Plus and K2 Plus Hi Combo

### Overview This replacement nozzle camera assembly includes the camera board, metal mounting bracket, screws, and mounting pad shown. It is designed to restore the printer’s internal camera position. ### Compatibility Creality K2 Plus

### Overview This ceramic heating-block hotend kit is a replacement high-flow assembly with a 0.4 mm nozzle. The compact kit combines the hotend heating block and nozzle components for the compatible printer. ### Compatibility Creality K2 Plus

### Overview This 370 mm × 370 mm frosted PEI build plate uses a 0.5 mm flexible spring steel sheet. The textured black surface is designed for the large-format K2 Plus print bed. ### Compatibility Creality K2 Plus

### Overview This compact filament detection board has a white terminal connector and mounts within the extruder assembly to detect filament interruption. The board shown measures approximately 15 mm × 14 mm. ### Compatibility Creality K2, K2 Pro, K2 Plus, and Sermoon M300

### Overview This hotend adapter board is made for Creality K2, K2 Pro, and K2 Plus printers. The images show a compact 37 mm × 12 mm PCB with heater, NTC, and fan connectors, labeled ports, mounting holes, and a fixing screw. ### Compatibility...

### Model Specific Size For K2 / K2 Pro / M300 Z Axis 42mm square flange, 45mm stack height, mounting hole spacing matches original Z-axis motor seat directly. ### Pre-assembled Standard Timing Pulley Finished synchronous gear fixed on motor shaft, matches original belt pitch...

### Dual Pre-crimped Standard Terminal Plug Both cable ends finished with original-spec plug connector, no wire stripping or soldering needed for direct installation. ### Thick Wear-resistant Rubber Outer Sheath Flexible thick rubber jacket improves bending resistance, effectively avoid inner core breakage caused by long-term...

### Complete Hotend Temperature Control Set Includes one ceramic heating tube and one 350℃ thermistor, a full set for hotend temperature maintenance. ### High Temperature Resistant Thermistor Thermistor rated for 350℃ maximum temperature, designed to work with high-temperature printing filaments. ### Precision Fit for...

### Exact Fit for Creality K2 / K2 Pro Specifically designed for Creality K2 and K2 Pro printers, this FPC cable perfectly matches the original LCD and mainboard connectors for direct replacement. ### High-Quality Durable Material Made of premium FPC material with reinforced insulation,...

### Perfect Compatibility for Creality K2 Series Specifically designed for Creality K2 / K2 Pro / K2 Plus 3D printers, matching the original extruder front cover structure for seamless installation. ### High-Precision Filament Runout Detection Built-in sensitive optical sensor accurately monitors filament presence, automatically...

### Perfect Compatibility Precision-engineered to fit Creality K2, K2 Pro, and K2 Plus printers seamlessly, matching the original extruder structure and filament runout detection system. ### High Torque & Stable Feeding All-metal helical gear with built-in bearing ensures smooth rotation, eliminating filament jams and...