Fans

FYSETC 3D Printer Fan for Flashforge Adventurer 5M AD5M 3010 Extruder Fan 5015 turbo fan printer head 12032 Case Fan 4020 Filter Fan 4010 turbo fan motherboard fan

Overview This 24V 12032 blower fan is designed for Voron V0 and Trident auxiliary cooling. The images show high wind power, low vibration, marked airflow direction, included wiring and hardware, and printed ducts not included. Compatibility Voron V0 and Voron Trident

Overview This 24V replacement fan range offers a 3010 axial fan, 4020 blower fan, or 6015 hydraulic fan. The pictured options are labeled 0.06A, 0.30A, and 0.08A respectively, so select the fan type that matches the original cooling position. Compatibility Creality K1 and K1...

About the Product For P1 Hotend Fan: 2510, double ball bearing, DC 5V, 0.4A, rated speed 15500 rpm, 2.96CFM, wire length 60mm, end stripping 3mm

Overview This 4010 24V RGB LED cooling fan adds airflow and illumination around the hotend. The images show a hydraulic bearing fan with LED lighting, 40 mm × 40 mm × 10 mm size, 8000 rpm speed, 120 mm cable, and PH2.0-2P / XH2.54...

About this item Compatible with X1 series Bamboo printers only, NOT compatible with P1 series and A1 series. The Cooling Fan for Hot end is used to cool and reduce the temperature of the ceramic heater. Smooth Rotation, No Stuttering, Long Lifespan; Smooth Airflow,...

Prevent Heat Creep for Reliable Printing This hotend cooling fan cools the heatsink to prevent heat from traveling upward and softening filament prematurely. Essential for high temperature printing and sealed chamber environments to avoid clogs and jams. 2510 Compact Size Perfect Fit With a...

DC24V Working Voltage With Original 3Pin Terminal Plug Same voltage and pin definition as stock fan, plug-and-play without wire cutting or rewiring. Premium Dual Ball Bearing Structure Double ball bearing rotor reduces shaft friction, long service life against high temperature near hotend. High Airflow...

Snapmaker U1 Exclusive Fit Designed specifically for Snapmaker U1 3D printer hotend, matching the installation space and connector perfectly. Standard DC 24V Brushless Specification DC 24V brushless fan with 25.5×25.5×10.5mm body size and 135mm total cable length, conforming to the original parameters. Efficient Heat...

Overview This 5015 DC 24V turbo cooling fan uses a Sunon MagLev blower body with red-black lead wires. The images show a 1.95W label and a side outlet design for compact high-airflow cooling on BLV, Voron 2.4 SB, and Vzbot builds. Compatibility BLV, Voron...

Overview This luminous hydraulic bearing fan adds cooling airflow and LED lighting for 3D printer heatsinks. The images show 2510, 3010, and 4010 fan sizes, 12V/24V options, multiple LED colors, low-noise hydraulic bearings, and a 3 cm cable. Compatibility Not machine-specific; suitable for 3D...

4010 FAN Dual Ball 5v 0.3V Speed：8000rpm Three Wire Fan Cable length 110mm 5010 FAN Dual Ball 5v 0.3V Speed：5900rpm Three Wire Fan Cable length 150mm

Overview This SV08 cooling fan set includes 5020, 4010, and 3010 24V double ball bearing fans for extruder and motherboard heat dissipation. The pictured specs cover airflow, noise range, wire length, and PH terminals for each fan size. Compatibility Sovol SV08

Overview This 24V 4010 cooling fan kit includes a 40 mm fan, a fitted air duct, cable, independent inline switch, and mounting accessories. The fan duct is designed to direct additional cooling air toward the extruder motor area. Compatibility Bambu Lab A1 and A1...

Overview This 24V Raspberry Pi 3010 fan for Voron 0.2 uses a hydraulic bearing brushless design. The images show a 30 mm × 30 mm × 10 mm frame, 10000 rpm speed, XH2.54 2-pin terminal, and 190 mm cable. Compatibility Voron 0.2

Core Function This part cooling fan is installed at the toolhead base and works with the air duct to rapidly cool extruded filament right after it leaves the nozzle. It ensures each layer solidifies properly before the next layer is deposited. Print Quality Improvement...

Direct Replacement for Flashforge AD5X Designed as an exact replacement for the original fan adapter board on Flashforge AD5X 3D printers. Full Signal Compatibility Supports all 4 fan signals (GND, FG, PWM, V), ensuring proper speed control and fan detection. Simplified Wiring & Maintenance...

Perfect fit for Flashforge AD5X extruder hotend Prevents Heat Creep and Nozzle Clogs： This 2510 cooling fan is mounted on the hotend heatsink to dissipate heat from the throat area. By keeping the cold side of the extruder cool, it prevents filament from softening...

Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...

About the Product Name: B-A1 Axial Flow Auxiliary Fan with Light Application: Suitable for A1 printers. Main Components: Printed parts, axial flow fan, light strip, touch control module Dimensions: 2425080mm Features Easy installation No interference with the print head Adjustable lighting, sensitive touch control,...