Universal & Tools

High Precision Geared Output Shaft This extruder motor features a high precision geared output shaft that ensures smooth and reliable motion. The precision gearing provides consistent filament feeding and accurate retraction for high quality prints. Reinforced Durable Construction Built with a reinforced body and...

Model Specific Size For K2 / K2 Pro / M300 Z Axis 42mm square flange, 45mm stack height, mounting hole spacing matches original Z-axis motor seat directly. Pre-assembled Standard Timing Pulley Finished synchronous gear fixed on motor shaft, matches original belt pitch for smooth...

Wide Voltage Compatibility Operates from 1.5V to 6V DC, with rated 3V performance at 3500RPM and up to 8000RPM at 5V, suitable for various low-voltage projects. Compact & Durable Design Small round form factor with metal housing, easy to install and integrate into DIY...

Perfect Fit for WEEDO TINA2S Precision-matched mounting and wiring for the TINA2S extruder, direct plug-and-play replacement without modification. High Torque & Stable Filament Feeding Nema17 42mm motor with optimized torque output eliminates under-extrusion and filament jams, ensuring smooth printing. Low Noise & Vibration-Free Operation...

Perfect Fit for WEEDO TINA2S Z Axis Original spec replacement motor, 100% compatible with TINA2S Z axis mounting and wiring, plug and play without modification. High Precision Layer Control 1.8° step angle, accurate Z-axis positioning, ensures consistent layer height and smooth prints, reduces layer...

Overview This extruder stepper motor is made for Elegoo Neptune 3 Plus and Max printers. The images show a compact motor with 17-tooth brass gear, stable low-noise running, 8.2 cm cable, plug-in connector, and boxed single-motor package. Compatibility Elegoo Neptune 3 Plus and Neptune...

Overview These 3V magnetic-control LED modules are offered in single, ring, and Y-shaped versions. Select the light pattern that fits the model: the single module uses one LED, while the ring and Y-shaped modules use 12 and 3 LEDs respectively. Compatibility DIY models for...

Compatibility: Ender 3 √ Ender 3 Pro √ Ender 3 S1 pro √ Ender 3 V2 √ CR10 √ CR10s √ CR-10 V2 √ CR-10S Pro √ Ender 5 √ Ender 5 Plus √ Ender 3 S1 √ X1 √ P1P √ P1S √...

Overview This switching adapter provides 24V 4A DC output for the Bambu Lab AMS 2 Pro drying function. The images show US and UK plug options, 100–240V AC input, 96W max output, 5.5 mm × 2.1 mm DC connector, and inline cable design. Compatibility...

Product description The Bull Ant control board kit is an entry-level control board specially designed for Klipper firmware, making it possible to realize the application of Klipper single nozzle at an extremely low price. Its simplicity Easy-to-use design concept, dual-core A53 controller as the...

Overview This Bullant motherboard set is designed for Voron V0 builds. The images show an 80 mm × 76 mm mainboard, a 41.5 mm × 32 mm toolhead board, cable, terminals, heatsink, onboard 2209 + GC6609 motor drivers, pre-installed firmware, WiFi, Ethernet, RGB support,...

Essential Consumable for 4-in-1 PTFE Adapter This cleaning pad is a direct replacement for the original filament wiper inside the Bambu Lab 4-in-1 PTFE adapter. Regular replacement ensures optimal performance of your multi-filament feeding system. Traps Debris Before It Reaches the Toolhead Installed at...

Custom-Fit Design for AD5X Specifically engineered to match the AD5X print head movement path, with optimized mounting points, bend radius, and chain length for seamless installation and precise cable routing. Enhanced Cable Protection Organizes wiring, PTFE tubes, and other print head components into a...

Overview This filament hub tube replacement includes a blue quick-release fitting for the extruder filament path. The fitting body measures approximately 21 mm long and 11.6 mm wide. Compatibility Bambu Lab A1 and A1 mini

5 Ports Total Inlet Design (4 Top + 1 Side) Four vertical top ports plus one oblique side port, support up to five different filaments for multi-color printing upgrade. Built-in Quick Push-in Tube Fittings Metal lock ring embedded connector, PTFE tube push&lock tightly, prevent...

Two-in-one Y Shunt Path Layout Dual equal inlet ports + single outlet port, freely connect AMS feed line and external spool tubing respectively. Standard Quick Push-in Fitting Interface Universal quick plug pneumatic connectors fit regular 4mm OD PTFE tubing, tight sealing no filament blockage....

Manual Multi-Color Printing Solution Switch between two different filaments manually to achieve dual-color printing with a single extruder, no complex multi-color upgrade required. Low-Friction Feeder Mechanism Built-in rolling design reduces filament resistance, ensuring smooth feeding and preventing jams even with flexible materials like TPU....

About the Product: The PTFE Tube Connector used in A1 mini is attached to the X-axis motor housing and can be removed together with the pneumatic connector. Note Please Visit the official website for specific installation steps on https://wiki.bambulab.com (Search keyword query).

About the product Name: High-flow hardened steel nozzle Function: Good insulation, not easy to plug, suitable for high-temperature consumables Quickly replace the hot end, the nozzle can be upgraded and replaced Use three kinds of metals: the tip is hardened steel, the inner tube...

Official website product description Link https://wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy Printed Link https://www.printables.com/model/756373-flashforge-adventurer-5m-enclosure