Electronics

Overview The FYSETC Spider V3.0 control board is a 32-bit STM32F446 motherboard for Voron-style 3D printer electronics. The images show a compact 155 mm × 76 mm PCB with CAN transceiver, four 74HCT365 buffer managers, color status LEDs, and support for Klipper, Marlin, and...

Product Introduction The E4 board is a minimal 3D printer control board based on the ESP32 microcontroller from ESPRESSIF, with built-in Wi-Fi and Bluetooth. The controller speed is up to 240MHz, 16M flash. Features Compact size: 90mm x 67mm Native Wi-Fi support 12V to...

Introduction The FYSETC SD-WIFI is a module that can run ESPwebDev（https://github.com/ardyesp/ESPWebDAV）.We made it into the shape of an SD card so it can be directly inserted into an existing SD card slot and powered.You can connect it to the router using the serial command...

Overview The FYSETC Spider V3.0 is a 32-bit 3D printer motherboard built around the STM32F446 chip. The images show a 155 mm × 76 mm four-layer PCB, CAN transceiver, 74HCT365 buffer managers, color status LEDs, and wiring-focused layout for Voron electronics builds running Klipper,...

Interactive bom Simple MCU board for use with Klipper 3D Printer firmware with: STM32F042F6P6 MCU with internal oscilator SWD (Serial Wire Debug) header for easy debugging 4 3A Mosfet outputs 2 Thermistor inputs 1 Level Shifted Neopixel output 1 GPIO header I2C Header with...

Features Mini12864LCD has 6 styles, the variety of styles to choose a more professional service for your machine A. RGB backlight black B. RGB backlight white C. Black on white D. White on black E. White on blue F. Black on Green Designed for...

Features STM32F042F6P6 MCU with internal oscillator SWD header for easy debugging (not populated by default) Dual USB port (Vertical or Horizontal) with breakout pin header for USB header I2C Screen connections for 1.3" display with jumpers on back for slecting which pins (1 or...

Warning If you use 48V to power the VMOT of the module and 24V step-down to power the VIO, please make sure that 48V and 24V are turned on at the same time (that is, VMOT and VIO arrive at the same time). Otherwise,...

FYSETC 3pin temperature header PT100 Stick Temperature Sensor For 3D Printer VORON 2.4 Spider Motherboard

Overview This HULA foot pad uses a layered anti-vibration assembly with a red central damper, bearings, foam pad, and mounting base. The complete foot measures 72.5 mm × 56 mm × 30.5 mm. Compatibility Snapmaker U1

Feature High-speed DPI interface 4.0“ IPS (wide viewing angle, 160°) display (86.4x51.8mm) 800x480 pixels (~235 PPI) 18-bit colour (262,144 colours)/18（26） 60 FPS frame rate/60 Contrast ratio: 500:1 Capacitive touch 5V@3A DC-DC onboard(9-28V input)/5V/3A DC-DC（28V） 40-pin female header included /40pin Standoffs included Compatible with all...

The Duet 3 Mainboard 6HC featuring 6 High Current Stepper Drivers is latest generation controller board that builds on Duet3D’s experience in developing the most flexible and expandable 3d printer control solutions. It is the core of the Duet 3 family which provides control...

Duet 3 v1.0 The DuetWifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. It has the same features as the Duet Ethernet other than providing a WiFi connectivity rather than ethernet, full feature description is available...

Built-in NTC100K thermistor size φ3X5mm terminal XH2.54 2PIN male head with terminal cable length 70mm 3D Printer Parts

The Duet 3 Mainboard 6HC featuring 6 High Current Stepper Drivers is latest generation controller board that builds on Duet3D’s experience in developing the most flexible and expandable 3d printer control solutions. It is the core of the Duet 3 family which provides control...

The Duet 3 Mainboard 6HC featuring 6 High Current Stepper Drivers is latest generation controller board that builds on Duet3D’s experience in developing the most flexible and expandable 3d printer control solutions. It is the core of the Duet 3 family which provides control...

Overview This BLV LED light control panel is an Arduino Mini Pro module board for BLV MGN Cube lighting control. 12/24V input, 5V and GND pin areas, USB port, headers, and screw terminal connections. Compatibility BLV MGN Cube

The Duet 3 Mainboard 6HC featuring 6 High Current Stepper Drivers is latest generation controller board that builds on Duet3D’s experience in developing the most flexible and expandable 3d printer control solutions. It is the core of the Duet 3 family which provides control...

FYSETC LED Lighting Kit No Worries to Print in night for Ender 3 and Ender 3 PRO 3D printer Applicable models Creality:  CR-10, CR10S, CR-10 4S, CR-10 5S, CR-10 MINI, CR-20, ENDER-3, ENDER-3 PRO, ENDER-3 V2

Clone Duet 3 6HC and 5i Colour Touch Screen Upgrades Controller Board Advanced 32bit For BLV MGN Cube 3D Printer CNC Machine