Skip to content
FYSETC


Trending Now

  • Bambulab
  • anycubic
  • creality 3d
  • voron

Popular Products

0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
$11.50 USD
$11.50 USD
Unit price
/ per 
View details
1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
$17.00 USD
$17.00 USD
Unit price
/ per 
View details
24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
from $8.00 USD
from $8.00 USD
Unit price
/ per 
View details

Trending Now

  • Bambulab
  • anycubic
  • creality 3d
  • voron

Popular Products

0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
$11.50 USD
$11.50 USD
Unit price
/ per 
View details
1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
$17.00 USD
$17.00 USD
Unit price
/ per 
View details
24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
from $8.00 USD
from $8.00 USD
Unit price
/ per 
View details
Sign In
0 0 items
  • Printers
    Printers
    Go to Printers
    Venture
    Voron
    LH-Stinger
    Go to Venture
    • Venture D300 Venture D300300mm High-speed Delta kit with Klipper and CNC parts
    • Venture XL Venture XL600x600 voron V2 style 3D printer kit with Klipper and CNC parts
    Go to Voron
    • Newest version Corexy 3D Printer VORON 2.4 R2 PRO With DSI5 Display CNC Hollow Gantry High Quality Printer Voron 2.4 R2 ProHigh-performance large-size CoreXY 3D printer kit
    • Voron 0.2 R1 V1.1 Pro Corexy 3d Printer Fast Printing High Precision Printers Support Klipper with CATALYST V2.0 and MINI Stealthburner Voron 0.2 R1 V1.1 ProCompact and ultra-fast mini CoreXY kit
    Go to LH-Stinger
    • FREE SHIPPING 3D Printer LH Stinger - High Performance, Speed and Precision 3D Printer LH-Stinger Kit48V High-Voltage AWD Power Meets Ultra-Lightweight Carbon Fiber for Extreme Speed
  • Accessories
    Accessories
    Go to Accessories
    For BambuLab
    For Anycubic
    For Creality 3D
    For Flashforge
    For Prusa
    For Other Brands
    DIY & Open Source
    Universal & Tools
    Go to For BambuLab
    • Vision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D Printer XY Axis Motion Accuracy Calibration Tool 50um Precision H2 Series
    • V2.1 AMS Lift Rack For Bambu Lab X1/P1 P2/X2 H2D/H2S/H2C AMS/AMS Pro/AMS HT 3D Printer Upgraded Parts for Bambu X Series
    • Hardened Steel High Flow Hotend 0.4mm 0.6mm for Bambu Lab P2S X2D 3D Printer Quick Swap Magnetic Installation P Series
    • Eddy Current Sensor for Bambu Lab A1 A1 Mini 3D Printer A Series
    • 2M 6Pin Male to Female AMS Extension Data Cable With Ferrite Core for Bambu Lab X1 P1 Series AMS Hub Buffer Connection AMS 2 Pro / AMS HT
    • AMS Hub Adapter for Bambu Lab A1/A1 Mini Multi-Color Feeding System Connector AMS
    • For Bambu Lab A1/A1 mini AMS Extension Cable AMS Lite 1M 4-pin With Magnetic Ring for Bambu A1 A1 mini 3d Printers AMS lite
    Go to For Anycubic
    • Replacement USB Camera for Anycubic Kobra 3 K3C K3M 3D Printer Kobra 2 Series
    • Strain Gauge Sensor Replacement for Anycubic Kobra X / Kobra 3 Kobra 3 Series
    • Strain Gauge Sensor Replacement for Anycubic Kobra X / Kobra 3 Kobra X
    • 10pcs Brass Nozzles for Creality K1/K1 Max High-speed 3D Printer Nozzles 0.3/0.4/0.6/1.0/1.2mm 1.75mm Filament for K1MAX CR-M4 Kobra Vyper
    • Anti Vibration Dust-Proof Feet for 2020/3030 Profile 3D Printer Parts for Bambu Lab Voron Prusa Ender 3 V2 3D Printers i3 Mega
    Go to For Creality 3D
    • V6 Hotend Sailfish High Flow Speed V6 J-head Kit Extrude Head For CR 10/CR10S/Ender 3/Ender3 PRO/VORON 2.4 3D Printer Hotend Ender Series
    • For Creality K1 MAX Upgraded Graphite 8mm Build Plate Fast Heating Ultra-flat 3d Printer Replacement Parts for K1 MAX K1 Series
    • Toolhead Wiring Cable Loom for Creality K2 Plus 3D Printer K2 Series
    • 6Pcs Silicone Sock for Creality SPARKX i7 3D Printer SPARKX i7
    • CNC All Metal Sherpa V3 Extruder High Temperature Resistance Light Weight Kit with 36 Moons Motor for Voron CR-10 Ender CR Series
    Go to For Flashforge
    • For FLASHFORGE AD5M/AD5MP/AD5X Camera Kit Easy To Install and Real-time Monitoring 3d Printing Camera High Quality 3D Accessorie Adventurer 5M
    • For FLASHFORGE AD5M/AD5MP/AD5X Camera Kit Easy To Install and Real-time Monitoring 3d Printing Camera High Quality 3D Accessorie Adventurer 5M Pro
    • Fan Adapter Board for Flashforge AD5X 3D Printer, 4-Pin Fan Interface Converter Adventurer 5X
    Go to For Prusa
    • Anti Vibration Dust-Proof Feet for 2020/3030 Profile 3D Printer Parts for Bambu Lab Voron Prusa Ender 3 V2 3D Printers Prusa i3 MK3 Series
    • For Prusa MK4 24V 40W Heater Cartridge Thermometer line and Heating Block Kit for Prusa MK4 3D Printer Extruder Prusa i3 MK4 Series
    • Prusa Mini 2.8 inch Display Prusa MINI
    • CHC High Temperature Resistant Ceramic Circle Ring Ceramic Heating Core Kit For Prusa MK4/XL 3D Printer Parts Prusa XL
    Go to For Other Brands
    • CNC Metal Door Hinge Upgrade Kit for Snapmaker U1 3D Printer 180°~235° Wide Angle Door Opening Hinge Snapmaker - U1
    • Nema17 42 Extruder Stepper Motor for WEEDO TINA2S WEEDO - TINA
    Go to DIY & Open Source
    • VORON Stealthburner Extruder Upgraded SB kit 3D Printer Parts for Voron 2.4 /Trident/Switchwire/1.8 Voron Kits
    • VORON 2.4/Trident Rabbit ERCF V2 Multi-color 8 /12 Color Kits 2.0 Enraged Upgrade Kits Multi Material MMU For Klipper 3D Printer Multi-Color / MMU Systems
    • 3D Printer Filament Storage Rack Wide Rolling Filament Spool Holders Racks with Wheels Heavy Duty Metal Shelf for PLA/ABS/TPU Safety & Storage
    Go to Universal & Tools
    • V6 Hotend Sailfish High Flow Speed V6 J-head Kit Extrude Head For CR 10/CR10S/Ender 3/Ender3 PRO/VORON 2.4 3D Printer Hotend Hotend
    • CNC All Metal Sherpa Mini Extruder High Temperature Resistance Light Weight Kit with 36 Moons Motor for Voron CR-10 Ender Extruder
    • Star Shaped Inner Wall Low Resistance Filament Tube for Snapmaker U1 3D Printer 6mm OD 650mm PTFE Guide Tube TPU Friendly PTFE & Tubing
    • Upgraded Hollow Rail MGN12H/MGN9H 300mm 350mm 400mm Linear Guide Rail Slide Carriage 3D Printer part for Voron 3d Printer Support OEM/ODM Motion
    • OBT Extruder Sherpa MINI Extruder 36 Motor G36HSY4405-6D-1200 For Sherpa mini Voron 2.4 Ender3 CR10 BLV Motors
    • Spider king motherboard Big 5160 max 60V 10-axis Industrial-grade Motherboard Support UART SPI for Voron Control Boards
    • TMC5160 Qhv 60V Stepper Stap Stok Spi Stille Motor Driver High Power Voor 3D Printer Cnc Graveermachine Drivers & Expansion
    • For Flashfroge Adventure 5M Pro Screen 4.3 Inch Touch Screen High-quality Real-time Monitoring of 3D Printing Screens & Interface
    • Switching Adapter 24V 4A for AMS 2 Pro Bambu Lab 3D Printer AC DC Adapter 5.5x2.1mm US/UK Plug 96W for Drying Function Power & Electrical
    • Graphite Build Plate Low Thermal Expansion and High Conductivity Heat PTFE Coating Bed 3d Printer Parts for Voron & VzBot Heatbed
    • Nevermore StealthMax Air Purifier For Voron Printers Promoting A Safer And Healthier Printing Environment Highly Efficient Odor Absorption Purifier 3D Printer Parts For Voron 300mm Cooling
    • Voron 2.4 R2 Trident 0.1 Full metal gantry Super light CNC Part instead of 2020 profile for Voron 250mm/300mm/350mm/0.1 Frame
    • Clicky-Clack Fridge Door For Voron 2.4/Trident 350mm Housing
    • VORON V0.1 UMBILICAL FRAME TOOL HEAD Include Chamber Temperature Thermistor And Neopixel Support Cables & Connectors
    • Klicky PCB Kit Voron 2.4 Probe Auto D2HW-A201D  3D Printer DIY Z Auto Leveling kits for Voron 3d Printers Sensors
    • Voron StealthBurner LED Kit NeoPixel RGBW Mini Button PCB Leds PTFE Wiring Harness For Voron2.4 Trident 3D Printer Parts Vision & Light
  • Custom Services
    Custom Services
    Go to Custom Services
    PCBA Turnkey Solutions
    CNC Machining
    3D Printer Parts OEM
    Go to PCBA Turnkey Solutions

    Our End-to-End Process

    1

    Schematic Design

    Define circuit logic and electrical connections before layout.

    2

    PCB Layout

    Physical board design, trace routing, and stack-up planning.

    3

    SMT/DIP Assembly

    Surface-mount and through-hole assembly with process control.

    4

    Component Sourcing

    Trusted suppliers, alternates, and lifecycle-aware procurement.

    5

    Functional Testing

    ICT, flying probe, and bench tests against design specs.

    6

    Final Integration

    Mechanicals, firmware, labeling, and pack-out for delivery.

    Need A Solution For Your Project?

    Our Engineers Are Ready To Support You.

    Learn More
    Go to CNC Machining

    Complex Parts Machining: One-Stop Solution

    Drawing Review
    Material Selection
    CNC Machining (3/4/5-Axis)
    Surface Finishing
    Quality Inspection
    Delivery

    Capabilities

    Aluminum Stainless Engineering Plastics

    Finishing

    Anodizing Powder Coating Sandblasting

    Start Your Project Now

    Reliable precision CNC machining for your custom components.From prototype to mass production, we cover all CNC needs.

    Learn More
    Go to 3D Printer Parts OEM

    Electronics

    • Power Supply | Controller
    • Heated Bed/Pad/Rod
    • Cables & Connectors
    • Fans | Motors | Drivers
    • Probe Sensor | Camera

    Mechanical

    • Linear Rails | Belts | Screws
    • Frame Profiles & CNC
    • Build Plates: FR4 / PC / PEI
    • PTFE | Bowden Tubes
    • Fasteners | Springs

    Hotend

    • Nozzle | Heatbreak | Block
    • Extruder Gears
    • Sensor | Thermocouple
    • Ceramic Heater
    • Silicone & Maintenance

    Can't find what you need?

    We offer custom parts and solutions tailored to your projects.

    Learn More
  • Cooperation & Discounts
      Cooperation & Discounts
    • Go to Cooperation & Discounts
    • Free Sample
    • Project Support
    • Affiliate
  • Support
      Support
    • Go to Support
    • Order Tracker
    • Support Center
    • Official Wiki
    • Shipping Policy
    • Returns & Refunds
    • Warranty Statement
    • Payment Help
FYSETC
FYSETC
Acount
Cart
0 0 items
Home Heatbed-total
Sidebar

Refined by Clear all

43 results
Clear all

    Heatbed-total

    Filter
    43 results
    20
    • 10
    • 15
    • 20
    • 25
    • 30
    • 50
    Most relevant
    • Featured
    • Most relevant
    • Best selling
    • Alphabetically, A-Z
    • Alphabetically, Z-A
    • Price, low to high
    • Price, high to low
    • Date, old to new
    • Date, new to old
    Sort

    Sort by:

    • Featured
    • Most relevant
    • Best selling
    • Alphabetically, A-Z
    • Alphabetically, Z-A
    • Price, low to high
    • Price, high to low
    • Date, old to new
    • Date, new to old
    • 510MM*510MM/20*20IN Double Sided Textured PEI Power Coated Gold Build Plate with Sticker Base For Creality CR10 S5510MM*510MM/20*20IN Double Sided Textured PEI Power Coated Gold Build Plate with Sticker Base For Creality CR10 S5

      510MM*510MM/20*20IN Double Sided Textured PEI Power Coated Gold Build Plate with Sticker Base For Creality CR10 S5

      About the product Upgrade Spring Steel Sheet with 2.0mm thicker base plate: Gold, Both sides can be used. Flexible, removable, can stick to magletics very well. High strength and heat resistance. Comes with 3d printer base plate 2.0mm, durable and more stronger magentism than...
      from $42.00 USD
      from $42.00 USD
      Unit price
      / per 
      Choose options
      Close
      Notify me
      Notify me
      Notify me
      Quick add
      Close
      Notify me
      Notify me
      Notify me
      View details
    • Visual Encoder Film for Bambu Lab H2D X2D 3D PrinterVisual Encoder Film for Bambu Lab H2D X2D 3D Printer

      Visual Encoder Film for Bambu Lab H2D X2D 3D Printer

      Sub 50μm Precision, Same as the Original Encoder This visual encoder film utilizes a matrix of 10⁴ encode markers and 5μm resolution optical measurements to deliver motion accuracy within 50μm, thinner than a human hair. It compensates for mechanical variances, belt loosening, and long...
      from $27.00 USD
      from $27.00 USD
      Unit price
      / per 
      Choose options
      Close
      Notify me
      Notify me
      Quick add
      Close
      Notify me
      Notify me
      View details
    • Vision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D PrinterVision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D Printer

      Vision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D Printer

      Below 50μm Motion Accuracy This Vision Encoder utilizes a matrix of 10⁴ encoded markers and 5μm-resolution optical measurements to calibrate XY axis motion to below 50μm. It compensates for natural mechanical variances, belt loosening, and long-term wear to maintain consistent print quality. Distance-Independent Precision...
      $38.00 USD
      $38.00 USD
      Unit price
      / per 
      View details
    • Double Sided Textured PEI Build Plate for Bambu Lab A1 P1P P1S X1 X1CDouble Sided Textured PEI Build Plate for Bambu Lab A1 P1P P1S X1 X1C

      Double Sided Textured PEI Build Plate for Bambu Lab A1 P1P P1S X1 X1C

      Double Sided Textured PEI Surface This build plate features dual sided black textured PEI powder coating on a 0.5mm spring steel base. When one side shows wear, simply flip it over and use the other side. Doubles the service life compared to single sided...
      $19.00 USD
      $19.00 USD
      Unit price
      / per 
      View details
    • Double Sided Textured PEI Build Plate for Bambu Lab H2D 3D PrinterDouble Sided Textured PEI Build Plate for Bambu Lab H2D 3D Printer

      Double Sided Textured PEI Build Plate for Bambu Lab H2D 3D Printer

      Double Sided Textured PEI Surface This build plate features dual sided black textured PEI coating. When one side shows wear, simply flip it over and use the other side. Doubles the service life compared to single sided plates. Ultra Strong Adhesion for Stable Printing...
      $28.50 USD
      $28.50 USD
      Unit price
      / per 
      View details
    • Vision Encoder Calibration Plate for Bambu Lab X2DVision Encoder Calibration Plate for Bambu Lab X2D

      Vision Encoder Calibration Plate for Bambu Lab X2D

      Less than 50μm Motion Accuracy This vision encoder calibrates the X2D printer to achieve motion accuracy below 50μm. The 5μm resolution optical measurement and 10⁴ encoded marker matrix ensures precise compensation for mechanical tolerances and belt wear over time. Distance Independent Precision Unlike traditional...
      $28.50 USD
      $28.50 USD
      Unit price
      / per 
      View details
    • LightGrip Cutting Mat for Bambu Lab A2L H2D H2S H2C 3D Printer Low Tack Surface for Paper Cardstock with Protective FilmLightGrip Cutting Mat for Bambu Lab A2L H2D H2S H2C 3D Printer Low Tack Surface for Paper Cardstock with Protective Film

      LightGrip Cutting Mat for Bambu Lab A2L H2D H2S H2C 3D Printer Low Tack Surface for Paper Cardstock with Protective Film

      Low Tack Gentle Hold This LightGrip cutting mat is specially formulated for lightweight materials like cardstock and paper.The low tack surface holds materials firmly during cutting while allowing peel off removal with no residue. Precision Positioning Grid The mat features a precise grid layout...
      $23.00 USD
      $23.00 USD
      Unit price
      / per 
      View details
    • Hotend Ceramic Heater for Anycubic Kobra X 3D Printer 160mm 2 Pin Heating Element Replacement Precise Fit Easy InstallationHotend Ceramic Heater for Anycubic Kobra X 3D Printer 160mm 2 Pin Heating Element Replacement Precise Fit Easy Installation

      Hotend Ceramic Heater for Anycubic Kobra X 3D Printer 160mm 2 Pin Heating Element Replacement Precise Fit Easy Installation

      Original Specification Ceramic Heater This ceramic heating cable is manufactured to match Anycubic’s original specifications for the Kobra X hotend. It delivers stable and consistent heating performance, ensuring your filament reaches the optimal melting temperature for smooth extrusion. Precise Fit for Kobra X Hotend...
      $7.50 USD
      $7.50 USD
      Unit price
      / per 
      View details
    • Magnetic Sticker for Creality K1 MAX 317x312mm 1.5mm Thick Soft Magnetic Base Heat Resistant Strong Magnetic Hold 3D Printer PartMagnetic Sticker for Creality K1 MAX 317x312mm 1.5mm Thick Soft Magnetic Base Heat Resistant Strong Magnetic Hold 3D Printer Part

      Magnetic Sticker for Creality K1 MAX 317x312mm 1.5mm Thick Soft Magnetic Base Heat Resistant Strong Magnetic Hold 3D Printer Part

      Strong Magnetic Hold This magnetic sticker provides powerful magnetic force to securely hold PEI spring steel plates in place during printing . No more shifting or warping. Your build plate stays firmly fixed throughout the entire print process. Perfect Fit for K1 MAX Precision...
      $29.00 USD
      $29.00 USD
      Unit price
      / per 
      View details
    • Stepper Motor for Anycubic Kobra 3 X Axis Y Axis 42 Motor  Replacement Part for Kobra 3 X Print Head Bed MovementStepper Motor for Anycubic Kobra 3 X Axis Y Axis 42 Motor  Replacement Part for Kobra 3 X Print Head Bed Movement

      Stepper Motor for Anycubic Kobra 3 X Axis Y Axis 42 Motor Replacement Part for Kobra 3 X Print Head Bed Movement

      Precision 1.8 Degree Step Angle Both X and Y axis motors feature a standard 1.8 degree step angle, providing precise positioning for your Kobra 3 printer. This ensures accurate print head and hotbed movement for high quality prints. Dual Axis Compatibility Available in X...
      from $21.00 USD
      from $21.00 USD
      Unit price
      / per 
      Choose options
      Close
      Notify me
      Notify me
      Quick add
      Close
      Notify me
      Notify me
      View details
    • Vision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D Printer XY Axis Motion Accuracy Calibration Tool 50um PrecisionVision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D Printer XY Axis Motion Accuracy Calibration Tool 50um Precision

      Vision Encoder Calibration Plate for Bambu Lab H2D H2S H2C 3D Printer XY Axis Motion Accuracy Calibration Tool 50um Precision

      50μm Motion Accuracy This vision encoder calibrates your H2 series printer to achieve motion accuracy below 50μm. The 5μm resolution optical measurement ensures precise compensation for mechanical tolerances and belt wear over time. Compatible with H2 Series The vision encoder works with all Bambu...
      $47.00 USD
      $47.00 USD
      Unit price
      / per 
      View details
    • Vision Encoder Calibration Grid Build Plate Sheet 335×345mm For Bambu Lab H2S H2C H2D Motion Precision Calibration ReplacementVision Encoder Calibration Grid Build Plate Sheet 335×345mm For Bambu Lab H2S H2C H2D Motion Precision Calibration Replacement

      Vision Encoder Calibration Grid Build Plate Sheet 335×345mm For Bambu Lab H2S H2C H2D Motion Precision Calibration Replacement

      Exclusive Size 335×345mm Perfect Match H2 Series Build Space Finished dimension 335mm×345mm aligns with original printer forming area, fully fits the platform inner boundary without trimming. High-precision Uniform Dot Grid Printing For Visual Position Capture Dense regular lattice dot layout is accurately printed, enables...
      $106.00 USD
      $106.00 USD
      Unit price
      / per 
      View details
    • PEI Nozzle Wiper for QIDI Plus4 3D Printer With Self-adhesive Backing  Automatic Nozzle Cleaning ReplacementPEI Nozzle Wiper for QIDI Plus4 3D Printer With Self-adhesive Backing  Automatic Nozzle Cleaning Replacement

      PEI Nozzle Wiper for QIDI Plus4 3D Printer With Self-adhesive Backing Automatic Nozzle Cleaning Replacement

      Overview This PEI nozzle wiper is made for QIDI Plus4 automatic nozzle cleaning. The images show a textured 25 mm × 16.5 mm cleaning surface with a peel-off self-adhesive backing for simple replacement on the printer. Compatibility QIDI Plus4
      $6.50 USD
      $6.50 USD
      Unit price
      / per 
      View details
    • Z Axis Stepper Motor for Creality K2 K2 Pro M300 3D Printer With Pre-installed Timing Pulley and Fixing ScrewsZ Axis Stepper Motor for Creality K2 K2 Pro M300 3D Printer With Pre-installed Timing Pulley and Fixing Screws

      Z Axis Stepper Motor for Creality K2 K2 Pro M300 3D Printer With Pre-installed Timing Pulley and Fixing Screws

      Model Specific Size For K2 / K2 Pro / M300 Z Axis 42mm square flange, 45mm stack height, mounting hole spacing matches original Z-axis motor seat directly. Pre-assembled Standard Timing Pulley Finished synchronous gear fixed on motor shaft, matches original belt pitch for smooth...
      $30.50 USD
      $30.50 USD
      Unit price
      / per 
      View details
    • 270*270mm Double Sided PET Carbon Fiber & Gold Textured PEI Spring Steel Build Plate  for Snapmaker U1 3D Printer270*270mm Double Sided PET Carbon Fiber & Gold Textured PEI Spring Steel Build Plate  for Snapmaker U1 3D Printer

      270*270mm Double Sided PET Carbon Fiber & Gold Textured PEI Spring Steel Build Plate for Snapmaker U1 3D Printer

      Two-in-one Dual Different Functional Surfaces One side is anti-wear PET carbon fiber textured layer, reverse side is granular gold PEI coating, switch two printing surfaces freely. High Rebound Spring Steel Core Substrate Spring steel base features excellent flexible resilience, slight bend after print cooling...
      $23.00 USD
      $23.00 USD
      Unit price
      / per 
      View details
    • 270*270mm Double Sided Gold Textured PEI Spring Steel Build Plate for Snapmaker U1 3D Printer  Hot Bed Replacement270*270mm Double Sided Gold Textured PEI Spring Steel Build Plate for Snapmaker U1 3D Printer  Hot Bed Replacement

      270*270mm Double Sided Gold Textured PEI Spring Steel Build Plate for Snapmaker U1 3D Printer Hot Bed Replacement

      Exclusive Size For Snapmaker U1 Precision cut in 270×270mm with positioning notches, fits U1 heated bed perfectly without cutting or modification. Double Side Gold Textured PEI Coating Two sides covered with even gold granular PEI coating, stable adhesion prevents printed model from warping. High...
      $20.50 USD
      $20.50 USD
      Unit price
      / per 
      View details
    • 270*270mm Double Sided Flex Sheet Low Temp Cold Printing Build Plate for Snapmaker U1 3D Printer Black or Blue Optional270*270mm Double Sided Flex Sheet Low Temp Cold Printing Build Plate for Snapmaker U1 3D Printer Black or Blue Optional

      270*270mm Double Sided Flex Sheet Low Temp Cold Printing Build Plate for Snapmaker U1 3D Printer Black or Blue Optional

      Double Side PUR Sandblast Coating Both sides finished with even temperature sandblast + PUR coating, two available finishes in black and blue for selection. High Elastic Spring Steel Base Material Core substrate adopts spring steel material, outstanding bending resilience, instantly rebound after deformation for...
      $23.50 USD
      $23.50 USD
      Unit price
      / per 
      Choose options
      Close
      Notify me
      Notify me
      Quick add
      Close
      Notify me
      Notify me
      View details
    • 257x257mm Magnetic Sticker for Bambu Lab 3D Printer Build Plate 1.5mm Thick Flexible Magnetic Base Sheet257x257mm Magnetic Sticker for Bambu Lab 3D Printer Build Plate 1.5mm Thick Flexible Magnetic Base Sheet

      257x257mm Magnetic Sticker for Bambu Lab 3D Printer Build Plate 1.5mm Thick Flexible Magnetic Base Sheet

      Perfect Fit for 257×257mm Build Plates Exact size for most 3D printers with 257×257mm build volume, ideal for Bambu Lab and similar models. Strong & Durable Magnetic Force Features strong magnetic force to securely hold PEI sheets, textured or smooth printing plates, making part...
      $11.00 USD
      $11.00 USD
      Unit price
      / per 
      View details
    • Heated Bed Leveling Nut for Snapmaker U1 3D PrinterHeated Bed Leveling Nut for Snapmaker U1 3D Printer

      Heated Bed Leveling Nut for Snapmaker U1 3D Printer

      Exact Fit for Snapmaker U1 Specifically designed for Snapmaker U1 printers, these leveling nuts perfectly match the heated bed adjustment system for direct replacement. Star-Shape Design for Easy Adjustment The four-prong star design allows comfortable hand-twisting, no tools required for quick bed leveling. Durable...
      $11.00 USD
      $11.00 USD
      Unit price
      / per 
      View details
    • Upgraded Build Plate Double-sided Printing 270x270mm Steel Sheet 3D Printer Parts For Snapmaker U1 3D PrinterUpgraded Build Plate Double-sided Printing 270x270mm Steel Sheet 3D Printer Parts For Snapmaker U1 3D Printer

      Upgraded Build Plate Double-sided Printing 270x270mm Steel Sheet 3D Printer Parts For Snapmaker U1 3D Printer

      Overview FYSETC Snapmaker U1 cold plate is a 270 mm × 270 mm double-sided spring steel build plate with PUR-coated black and blue surfaces, designed for strong adhesion, easy model removal, and water-wipe cleaning. Compatibility Snapmaker U1
      $30.00 USD
      $30.00 USD
      Unit price
      / per 
      Choose options
      Close
      • Blue
      • Black
      Quick add
      Close
      View details
    Showing 1 -20 of 43 total
    Show more

    PRODUCT

    • For BambuLab
    • For Anycubic
    • For Creality 3D
    • For Flashforge
    • For Prusa
    • Show All

    Support

    • Order Tracker
    • Support Center
    • Official Wiki
    • Payment Help

    Policy

    • Shipping Policy
    • Returns & Refunds
    • Warranty Statement

    Services

    • PCBA Turnkey Solutions
    • CNC Machining
    • 3D Printer Parts OEM
    • Free Sample

    Contact US

    FYSETC (HK) CO., LIMITED, NO. 45, HOI YUEN ROAD, ROOM 5042, 5/F, YAU LEE CENTRE, KWUN TONG

    Call us: +86 15989447740

    Order Support :shop@fysetc.com

    Technical Support : support@fysetc.com

    SUBSCRIBE TO OUR NEWSLETTER

    Get the latest updates on new products and upcoming sales

    • Facebook
    • YouTube

    Copyright © 2014-2026 FYSETC. All rights reserved.

    • Choosing a selection results in a full page refresh.

    Thanks for subscribing!

    This email has been registered!

    Shop the look

    Choose options

    Edit option
    Back In Stock Notification

    Choose options

    this is just a warning
    Login
    Forgot your password? Create account
    Shopping cart
    0 items
    Close
    Search

    Trending Now

    • Bambulab
    • anycubic
    • creality 3d
    • voron

    Popular Products

    0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

    0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

    0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
    $11.50 USD
    $11.50 USD
    Unit price
    / per 
    View details
    1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

    1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

    Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
    $17.00 USD
    $17.00 USD
    Unit price
    / per 
    View details
    24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

    24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

    Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
    from $8.00 USD
    from $8.00 USD
    Unit price
    / per 
    View details

    Trending Now

    • Bambulab
    • anycubic
    • creality 3d
    • voron

    Popular Products

    0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

    0.2mm Hardened Steel Hotend for Bambu Lab P2S X2D 3D Printer Detachable Design High Temperature 300℃ Wear Resistant Precision Nozzle

    0.2mm Ultra High Precision Printing Features a 0.2mm precision nozzle capable of printing extremely fine details and complex structures, ideal for jewelry design, figurines, miniatures, and other high precision applications. Hardened Steel Nozzle Wear Resistant Nozzle made of hardened steel with hardness far exceeding...
    $11.50 USD
    $11.50 USD
    Unit price
    / per 
    View details
    1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement1.5M  Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

    1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement

    Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
    $17.00 USD
    $17.00 USD
    Unit price
    / per 
    View details
    24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

    24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series

    Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
    from $8.00 USD
    from $8.00 USD
    Unit price
    / per 
    View details
    Menu
    Sign In Create an account
    My wish list