FYSETC Double Sided Texured PEI And Smooth PEI Build Plate Textured PEI Sheet Powder Coated Spring Steel Sheet Build Plate 355mm For Voron 2.4 /Trident /Sovol SV08 3D Printer

## Advantage - No more 3M Masking tape - No more glue stic - No more ABS juice - No more PEI sheet replacement - Easy to print - Easy to remove by bending and popping it off - Easy to maintain - Double-sided  - Lower runing cost  especially for printing farm - Genuine PEI powder coating - Hardened steel spring sheet never diforming - Make adding inductive Z-probe possible  - Possible to adding ABL  for some low-cost printers ## Size 350×350mm / 250×250mm ## Material Compatibility - PLA - ABS - PETG - TPU - PVA - etc. ## Printer Compatibility - Voron v2.4 - Pulse printer with FlexPlate installation - Similar bed size printer with Magnetic Base. ## Maintenance Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed. ## Print reference temperature 1. PLA: **Hot bed:** 50-60 ° C **Nozzle:** 200-210 ° C 2. ABS: **Hot bed:** 55-70 ° C **Nozzle:** 240-250 ° C 3. PETG: **Hot bed:** 55-70 ° C **Nozzle:** 240-250 ° C 4. Carbon fiber: **Hot bed:** 50-60 ° C **Nozzle:** 200-220 ° C 5. TPU: **Hot bed:** 50-60 ° C **Nozzle:** 200-220 ° C 6. Wood: **Hot bed:** 50-60 ° C **Nozzle:** 200-220 ° C