FYSETC

### Overview These copper plated nozzles are designed for high-temperature Creality hotends. The images show 0.3 mm, 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, and 1.2 mm sizes, M6×1 thread, 23 mm length, 300°C maximum temperature, high-hardness body, smoother inner wall, and 600...

1. For use on MK4 only. 2. NTC 100k Thermal, Wire length 60cm. 3. Using resistance-temperature characteristics to measure temperature, control temperature and temperature compensation of components, devices and circuits

### Exact Fit for Snapmaker U1 Specifically designed for Snapmaker U1 printers, these leveling nuts perfectly match the heated bed adjustment system for direct replacement. ### Star-Shape Design for Easy Adjustment The four-prong star design allows comfortable hand-twisting, no tools required for quick bed...

### Exact Fit for Flashforge AD5X Precision-engineered to match the original filament cutter assembly, ensuring perfect fit and function in the AD5X extruder. ### Sharp & Durable Cutting Blade Made of high-hardness metal, the blade stays sharp longer, providing clean cuts and preventing filament...

**1. Performance characteristics of helical gear:** - The meshing performance is better. Compared with the spur gear, the helical gear meshes more fully during the transmission process, the gear transmission is more stable, and the transmission force is more linear; - Long service life....

### Dual-layer Independent Filtration Structure(Front HEPA13 + Back Activated Carbon) Front pleated HEPA13 media traps 99.95% ultrafine plastic particles & PM2.5; rear honeycomb activated carbon eliminates VOC gas and printing odor separately. ### Surrounding Elastic Black Foam Sealing Edge High-density sponge wraps full perimeter...

### Dual Layer Two-stage Filtration Structure HEPA13 front layer traps ultrafine particles, back activated carbon layer absorbs TVOC, formaldehyde and printing odor. ### High Density Honeycomb Activated Carbon Honeycomb porous charcoal owns bigger adsorption space, longer usage cycle than common loose carbon filter. ###...

### High Precision 10 Tooth Gear Features a precision machined 10 tooth gear that tightly grips the filament, ensuring smooth feeding and accurate retraction while reducing extrusion fluctuation. ### Low Noise & Stable Operation Optimized internal motor structure delivers low noise operation and maintains...

### Overview High precision strain gauge replacement for Creality K1 SE uses a 34 mm × 34 mm sensor plate with a 250 mm 4-pin lead wire for extruder force sensing and bed/nozzle pressure detection. ### Compatibility Creality K1 SE

### Overview This circular stepper motor is designed for Creality K1 and K1 Max printers. The images show a geared round motor with wired connector, stable operation, high precision, fast response, 1.8° step angle, 0.8A nominal current, 12-tooth gear, low-noise rotation, and technical drawing...

### Overview High quality aluminum cooling block for the Creality Sprite Extruder Pro uses a finned 41 mm × 20 mm × 13 mm heat sink body to help dissipate heat around the hotend throat and support stable extrusion. ### Compatibility Creality Ender-3 S1...

### Overview This extruder stepper motor is made for Elegoo Neptune 3 Plus and Max printers. The images show a compact motor with 17-tooth brass gear, stable low-noise running, 8.2 cm cable, plug-in connector, and boxed single-motor package. ### Compatibility Elegoo Neptune 3 Plus...

### Overview This SV07 extruder stepper motor is designed for Sovol SV07 printers. The images show a square stepper motor with brass gear, white plug connector, 117 mm cable, stable operation, high precision, low-noise running, high-temperature resistance, and fast response. ### Compatibility Sovol SV07

### Overview This ABS printed parts set is made for Voron 2.4 R2 Pro 350 mm builds with the SB Stealthburner toolhead. The images show large red, black, and gray printed part layouts including toolhead shells, ducts, fan plates, brackets, panels, covers, and small...

### Overview High sensitivity strain gauge replacement for ELEGOO Centauri Carbon 1 uses a 34 mm × 34 mm sensor body, 4-pin connector, and approximately 240 mm cable for pressure sensing in the EG-CC1 toolhead. ### Compatibility ELEGOO Centauri Carbon 1, EG-CC1

### Overview This synchronous belt kit is designed for Bambu Lab X1 and P1 series printers. The images show rubber fiberglass belts marked 2M-1142-6, a 1142 mm Z-axis belt, 1442 mm XY-axis belt, 6 mm and 10 mm bandwidth options, heat and aging resistance,...

### Complete Hotend Temperature Control Set Includes one ceramic heating tube and one 350℃ thermistor, a full set for hotend temperature maintenance. ### High Temperature Resistant Thermistor Thermistor rated for 350℃ maximum temperature, designed to work with high-temperature printing filaments. ### Precision Fit for...

### Overview This Hollow MGN9H 50 mm Z2 rail is made for Voron Tap motion assemblies. The images show a compact silver linear rail carriage with a hollow center slot, mounting holes, black end caps, metal rail body, and 50 mm length for lightweight...

### Premium Brass Construction Made of high-quality solid brass, this 90° heat set insert adapter delivers fast, even heat transfer, ensuring consistent heating of the insert without overheating the printed part. Durable and heat-resistant for long-term use. ### 90° Elbow Design for Hard-to-Reach Spots...

### Overview This hotbed PEI steel plate limit baffle set helps position the build plate on Voron printers. The images show two black L-shaped metal stops with screw holes, durable metal finish, and red bed strips for plate edge positioning. ### Compatibility Voron 2.4...