-
0.4mm Detachable Hardened Steel Nozzle Hotend Kit for Bambu Lab P2S 3D Printer With Spanner Tools High Flow Printing Replacement
- Regular price
- $11.50
- Regular price
-
- Sale price
- $11.50
- Unit price
- per
### Detachable Quick-release Hardened Steel Nozzle For Independent Single Nozzle Swap Split detachable nozzle design enables separate nozzle replacement without disassembling full heating block structure. ### High Temperature & Abrasion Resistant Hardened Steel Fits Carbon & Filled Filaments Hardened steel construction withstand abrasive composite...- Regular price
- $11.50
- Regular price
-
- Sale price
- $11.50
- Unit price
- per
-
1.5M Extruder Extension Cable Assembly Kit for Creality CR-10 Smart Pro Ender-5 S1 3D Printer Hotend Upgrade Wiring Replacement
- Regular price
- $17.00
- Regular price
-
- Sale price
- $17.00
- Unit price
- per
### Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. ### Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame...- Regular price
- $17.00
- Regular price
-
- Sale price
- $17.00
- Unit price
- per
-
1200mm Total Length Dual Pre-crimped Plug Print Head Cable for Creality K2 Pro 3D Printer Thick Flexible Rubber Sheath
- Regular price
- $18.00
- Regular price
-
- Sale price
- $18.00
- Unit price
- per
### Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. ### Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break...- Regular price
- $18.00
- Regular price
-
- Sale price
- $18.00
- Unit price
- per
-
16 Colors Filament Hub for Anycubic Kobra 3 Kobra 3 Max S1 S1C 3D Printer 16 Way Filament Convergence Manifold with Screws
- Regular price
- $21.00
- Regular price
-
- Sale price
- $21.00
- Unit price
- per
### 16 Channel Filament Convergence Features 16 inlet ports for multi-color filaments, converging them into a single output path. ### Perfect Fit for Kobra 3 Series Designed to match the installation position of Anycubic Kobra 3/Kobra 3 Max/S1/S1C 3D printers. ### Precision Size for...- Regular price
- $21.00
- Regular price
-
- Sale price
- $21.00
- Unit price
- per
-
24V 3010 4010 Cooling Fan for Creality SPARKX i7
- Regular price
- From $7.00
- Regular price
-
- Sale price
- From $7.00
- Unit price
- per
### Three Different Position Fans Includes mainboard 4010 hydraulic fan, extruder motor 3010 hydraulic fan and hotend 3010 ball bearing fan, match full machine cooling demands. ### Bearing Classification Design Hydraulic bearing for low noise daily cooling, ball bearing resistant high temperature, avoid fan...- Regular price
- From $7.00
- Regular price
-
- Sale price
- From $7.00
- Unit price
- per
-
24V DC Cooling Fan Kit for Anycubic Kobra S1 Combo Series
- Regular price
- From $8.00
- Regular price
-
- Sale price
- From $8.00
- Unit price
- per
### Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. ### 24V DC Standard Specification All fans are 24V DC powered, matching the...- Regular price
- From $8.00
- Regular price
-
- Sale price
- From $8.00
- Unit price
- per
-
24V DC Cooling Fan Replacement for Flashforge AD5X Extruder Hotend High Airflow 3D Printer Accessories
- Regular price
- $8.00
- Regular price
-
- Sale price
- $8.00
- Unit price
- per
### Perfect fit for Flashforge AD5X extruder hotend ### 24V DC high airflow cooling performance ### 25x25x10mm compact size for easy installation ### Durable and stable operation for long printing tasks ### Reliable replacement fan for 3D printer hotend cooling- Regular price
- $8.00
- Regular price
-
- Sale price
- $8.00
- Unit price
- per
-
257x257mm Magnetic Sticker for Bambu Lab 3D Printer Build Plate 1.5mm Thick Flexible Magnetic Base Sheet
- Regular price
- $11.00
- Regular price
-
- Sale price
- $11.00
- Unit price
- per
### Perfect Fit for 257×257mm Build Plates Exact size for most 3D printers with 257×257mm build volume, ideal for Bambu Lab and similar models. ### Strong & Durable Magnetic Force Features strong magnetic force to securely hold PEI sheets, textured or smooth printing plates,...- Regular price
- $11.00
- Regular price
-
- Sale price
- $11.00
- Unit price
- per
-
270*270mm Double Sided Flex Sheet Low Temp Cold Printing Build Plate for Snapmaker U1 3D Printer Black or Blue Optional
- Regular price
- $23.50
- Regular price
-
- Sale price
- $23.50
- Unit price
- per
### Double Side PUR Sandblast Coating Both sides finished with even temperature sandblast + PUR coating, two available finishes in black and blue for selection. ### High Elastic Spring Steel Base Material Core substrate adopts spring steel material, outstanding bending resilience, instantly rebound after...- Regular price
- $23.50
- Regular price
-
- Sale price
- $23.50
- Unit price
- per
-
270*270mm Double Sided Gold Textured PEI Spring Steel Build Plate for Snapmaker U1 3D Printer Hot Bed Replacement
- Regular price
- $20.50
- Regular price
-
- Sale price
- $20.50
- Unit price
- per
### Exclusive Size For Snapmaker U1 Precision cut in 270×270mm with positioning notches, fits U1 heated bed perfectly without cutting or modification. ### Double Side Gold Textured PEI Coating Two sides covered with even gold granular PEI coating, stable adhesion prevents printed model from...- Regular price
- $20.50
- Regular price
-
- Sale price
- $20.50
- Unit price
- per
-
270*270mm Double Sided PET Carbon Fiber & Gold Textured PEI Spring Steel Build Plate for Snapmaker U1 3D Printer
- Regular price
- $23.00
- Regular price
-
- Sale price
- $23.00
- Unit price
- per
### Two-in-one Dual Different Functional Surfaces One side is anti-wear PET carbon fiber textured layer, reverse side is granular gold PEI coating, switch two printing surfaces freely. ### High Rebound Spring Steel Core Substrate Spring steel base features excellent flexible resilience, slight bend after...- Regular price
- $23.00
- Regular price
-
- Sale price
- $23.00
- Unit price
- per
-
2GT 6mm Width Timing Belt XY Axis Complete Kit For Anycubic S1C 3D Printer Motion Transmission Replacement
- Regular price
- $10.50
- Regular price
-
- Sale price
- $10.50
- Unit price
- per
- Regular price
- $10.50
- Regular price
-
- Sale price
- $10.50
- Unit price
- per
-
2M 6Pin Male to Female AMS Extension Data Cable With Ferrite Core for Bambu Lab X1 P1 Series AMS Hub Buffer Connection
- Regular price
- $12.00
- Regular price
-
- Sale price
- $12.00
- Unit price
- per
### 6Pin Original Standard Pin Definition Same pin layout as original factory cable, full compatible with P1P/P1S/X1/X1C/X1E all AMS variants. #### 2000mm Extra Long Total Length 2m full length freely realize multi-AMS stacking, AMS to hub / buffer / AMS2Pro remote layout. ### Built-in...- Regular price
- $12.00
- Regular price
-
- Sale price
- $12.00
- Unit price
- per
-
2M-1220-6 Z-axis Timing Belt for Anycubic Kobra S1C
- Regular price
- $7.50
- Regular price
-
- Sale price
- $7.50
- Unit price
- per
### Exact Fit for Anycubic Kobra S1C 3D Printer Specially designed for Anycubic Kobra S1C, the 2M-1220-6 timing belt perfectly matches the Z-axis drive system for direct replacement. ### High Tensile Strength & Wear Resistance Made of reinforced rubber with steel tension members, the...- Regular price
- $7.50
- Regular price
-
- Sale price
- $7.50
- Unit price
- per
-
2Pin XH2.54 Cyberbrick Switch Module with Cable Universal Slide ON/OFF Switch for 3D Printer DIY & Electronic Projects
- Regular price
- $7.00
- Regular price
-
- Sale price
- $7.00
- Unit price
- per
- Regular price
- $7.00
- Regular price
-
- Sale price
- $7.00
- Unit price
- per
-
3010 DC 24V Brushless Print Head Cooling Fan for Anycubic Kobra 3 3D Printer High Airflow Low Noise Replacement
- Regular price
- $7.00
- Regular price
-
- Sale price
- $7.00
- Unit price
- per
### Kobra 3 Exclusive Fit Designed specifically for Anycubic Kobra 3 3D printer print head, matching the installation position and connector perfectly. ### Standard 3010 DC 24V Specification 30×30×10mm brushless fan with DC 24V rated voltage, conforming to the original printer’s parameters. ### High...- Regular price
- $7.00
- Regular price
-
- Sale price
- $7.00
- Unit price
- per
-
3D Print Support Removal Pliers
- Regular price
- $12.50
- Regular price
-
- Sale price
- $12.50
- Unit price
- per
### Precision Tip for Hard-to-Reach Areas Ultra-thin pointed jaws easily access narrow gaps and fine support structures, allowing you to cut supports flush with the model surface without damage. ### Damage-Free Design for All 3D Prints Smooth, scratch-resistant jaws prevent marring delicate resin prints...- Regular price
- $12.50
- Regular price
-
- Sale price
- $12.50
- Unit price
- per
-
3D Printer Beschermhoes Isolatie Stofkap Creasity 3D Printer Shell Voor Lcd Hars 3D Printer Voor Photon Mono X
- Regular price
- $18.48
- Regular price
-
$18.48 - Sale price
- $18.48
- Unit price
- per
### Elite Resin 3D Printer Blackout Cover Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal...- Regular price
- $18.48
- Regular price
-
$18.48 - Sale price
- $18.48
- Unit price
- per
-
3D打印玩具仿真摆件关节可动香蕉小人伙伴书架办公区装饰
- Regular price
- From $0.19
- Regular price
-
$0.19 - Sale price
- From $0.19
- Unit price
- per
- Regular price
- From $0.19
- Regular price
-
$0.19 - Sale price
- From $0.19
- Unit price
- per
-
42 Z Axis Stepper Motor Nema17 for WEEDO TINA2S
- Regular price
- $20.00
- Regular price
-
- Sale price
- $20.00
- Unit price
- per
### Perfect Fit for WEEDO TINA2S Z Axis Original spec replacement motor, 100% compatible with TINA2S Z axis mounting and wiring, plug and play without modification. ### High Precision Layer Control 1.8° step angle, accurate Z-axis positioning, ensures consistent layer height and smooth prints,...- Regular price
- $20.00
- Regular price
-
- Sale price
- $20.00
- Unit price
- per
Currency

