FYSETC

Overview This 4010 24V RGB LED cooling fan adds airflow and illumination around the hotend. The images show a hydraulic bearing fan with LED lighting, 40 mm × 40 mm × 10 mm size, 8000 rpm speed, 120 mm cable, and PH2.0-2P / XH2.54...

The first 10 customers to place an order will receive a free MMU3 set (prinparts not included).First, a huge thank you to Juan Puchol for his idea. This is an upgrade kit for upgrading the Prusa MK4 to a corexy structure. This significantly increases...

Noise Reduction This lithium soap based lubricant effectively reduces friction noise during printer operation. It ensures smooth and quiet printing performance, significantly improving your printing experience. Wear Protection and Anti Rust The high lubricity formula reduces friction and wear on mechanical components. It forms...

Description The boards are made by FYSETC according to the original CREAPUNK design Product page available here https://creapunk.netlify.app/ A compact, rear-mountable, cost-effective closed-loop high-current Stepper/BLDC motor driver, featuring multi-level protection and a comprehensive set of communication interfaces. Driving capability: 3.2A RMS, 4.5A PEAK Up...

We are glad that after a lot of testing, we have developed this CryoNix upgrade plate, which can greatly improve your print quality and provide you with more perfect prints.

Fix TC2856 Cutter Detection Errors If your K2 Plus printer shows TC2856 error “Cutter issue, the cutter may be jammed or missing”, a faulty detection board is often the cause. Replacing this board restores proper blade detection and eliminates false alarms. Hall Sensor Non...

Not just for ERCF, but also for some single board designs, etc.

Overview This DC 24V cooling fan kit uses an 80 mm × 80 mm × 15 mm axial fan with a 215 mm lead including terminals. It is designed to support air circulation and filtration in the compatible printer system. Compatibility Anycubic Kobra S1C...

Snapmaker U1 Exclusive Fit Designed specifically for Snapmaker U1 3D printer hotend, matching the installation space and connector perfectly. Standard DC 24V Brushless Specification DC 24V brushless fan with 25.5×25.5×10.5mm body size and 135mm total cable length, conforming to the original parameters. Efficient Heat...

QiDi Plus 4 Exclusive Fit Designed specifically for QiDi Plus 4 3D printer hotend, matching the installation position and connector perfectly. Standard 3010 DC 24V Specification 30×30×10mm brushless fan with DC 24V rated voltage, 10000 RPM speed, conforming to the original printer’s parameters. High...

Overview This DC 5V 4010 motherboard cooling fan is made for Bambu X1 and P1 printers. The images show a 40 mm × 40 mm × 10 mm deep groove ball bearing fan with a 1.25 mm 4P integrated terminal, 210 mm cable, 4000...

Overview This deburring and chamfering tool is designed for cleaning and trimming 3D printer parts. The images show a 12V, 24W hand tool with 0.3 mm–3.2 mm clamping range, 2000–18000 rpm stepless speed control, a 170 mm body, cooling vents, and assorted grinding, drilling,...

Overview This reusable ventilated filament spool replaces a waste-paper core with a detachable plastic spool. The spool measures approximately 200 mm in diameter, 67 mm wide, and has a 54 mm center opening. Compatibility Filament rolls with a compatible paper core

Overview Flexible FPC display connection ribbon cable for Anycubic Kobra S1C 3D printers, designed for stable high-speed signal transmission and easy replacement installation. Compatibility Anycubic Kobra S1C

Perfect Fit for SPARKX i7 Display This flex cable is specifically designed for Creality SPARKX i7 3D printer. It connects the 2.85-inch color touchscreen to the mainboard with precise length of 280mm, ensuring a perfect fit and stable connection. Gold-Plated Contacts for Stable Signal...

Perfect Compatibility Exclusively tailored for Bambu P1 series 3D printers, fits the reserved installation position and interface perfectly. Standard Specification Equipped with 16Pin connectors at both ends and measures 9.5cm in total length, conforming to the internal wiring layout of the device. Multi-signal Transmission...

DIY Creative Assembly Project This turbo lamp kit is designed for makers who enjoy hands on building. You print the shell parts yourself and assemble the complete lamp with the included LED module and hardware. A fun project that results in a unique desk...

Many thanks to Rogerlz Rogerio Goncalves for his contribution to this kit project, we would also like to thank the other members who participated in this project. Link： https://github.com/rogerlz/Doron-Velta https://github.com/FYSETC/FYSETC-Doron_Velta

Dual Pre-crimped Standard Terminal Plug Both cable ends finished with original-spec plug connector, no wire stripping or soldering needed for direct installation. Thick Wear-resistant Rubber Outer Sheath Flexible thick rubber jacket improves bending resistance, effectively avoid inner core breakage caused by long-term print head...

Overview This 256 × 268 mm flexible spring steel build plate is made for the Anycubic Kobra 3 series. The images show textured PEI and PET carbon fiber surface options, strong adhesion, easy replacement, and powder coating for increased surface hardness. Compatibility Anycubic Kobra...