Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
Overview This 10-piece M6 nozzle set is made for 1.75 mm filament and has a 16.8 mm overall length. Choose plated copper, hardened steel, or brass nozzles in the available diameters for high-temperature and wear-resistant printing. Compatibility Creality Ender 3 V3 SE, Ender 7,...
The hollow guide rail is a project that we finalized after extensive testing. Made of stainless steel, the hollow design makes the guide rail lighter and supports high-speed printing.
### Please note
1. Preload - represents preloading the slider on the guide rail, and the slider becomes tighter on the guide rail. Preload Z1 represents light preloading, and Preload Z2 represents heavy preloading (if you choose the Preload option, please delay the delivery time 10 days!)
No Preload - means that the slider can easily move back and forth on the guide rail.
2. We support customization of sizes MGN-C and MGN-H with a length of 100-1000mm. If you need customization, please contact customer service. Thank you for your support!
### Package List
1 × Hollow Stainless Steel Guide Rail
### Features
1. Low noise during operation, smooth and rapid movement.
2. Less wear can maintain accuracy for a long time.
Exclusive Compatibility For CR-10 Smart Pro & Ender-5 S1 Printer Models Pre-matched terminal definition consistent with original factory circuit, direct plug replacement without pin rearrangement. Fixed 1.5M Total Length Meets Remote Extrusion Modification Demand Enough reserved length for hotend lifting and frame refit, eliminate...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
Overview This 10-piece M6 nozzle set is made for 1.75 mm filament and has a 16.8 mm overall length. Choose plated copper, hardened steel, or brass nozzles in the available diameters for high-temperature and wear-resistant printing. Compatibility Creality Ender 3 V3 SE, Ender 7,...