Overview This 12-color laser engraving marking paper measures 270 mm × 390 mm per sheet. The colored surface is designed to reveal contrasting marks after laser engraving, making it suitable for personalized graphics on supported surfaces. Compatibility Laser engraving and cutting machines. Suitable for...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break performance under...
Raspberry Pi 5 inch DSI Touch Screen MIPI LCD V1.1 5 Inch LCD Touch Screen 800 X 480 DSI Display IPS Working With Raspberry Pi5/4B/CM4/3B+/3A+/3B/CM3/CM3+/2B/B+/A+
Raspberry Pi 5 inch DSI Touch Screen MIPI LCD V1.1 5 Inch LCD Touch Screen 800 X 480 DSI Display IPS Working With Raspberry Pi5/4B/CM4/3B+/3A+/3B/CM3/CM3+/2B/B+/A+
Raspberry Pi 5 inch DSI Touch Screen MIPI LCD V1.1 5 Inch LCD Touch Screen 800 X 480 DSI Display IPS Working With Raspberry Pi5/4B/CM4/3B+/3A+/3B/CM3/CM3+/2B/B+/A+
FYSETC 5 inch DSI capacitive touch screen for Raspberry Pi uses an 800 × 480 IPS display, DSI interface, 5-point touch, 160° viewing angle, and 120 mm × 75 mm panel size for Klipper-style control displays.
Overview This 12-color laser engraving marking paper measures 270 mm × 390 mm per sheet. The colored surface is designed to reveal contrasting marks after laser engraving, making it suitable for personalized graphics on supported surfaces. Compatibility Laser engraving and cutting machines. Suitable for...
Complete Cooling System Replacement Includes all 4 types of fans for Anycubic Kobra S1 Combo: mainboard cooling, extruder blower, air filtration and motor cooling, one-stop solution for all thermal needs. 24V DC Standard Specification All fans are 24V DC powered, matching the printer’s original...
Two Ends Factory Pre-molded Standard Terminal Both sides finished with original-spec black lock connector, no wire stripping or soldering needed for direct plug-in installation. Red Heat-shrink Reinforced Joint Design One terminal joint wrapped by red heat shrink tube for reinforcement, improve anti-break performance under...